SQ4-A22-N

Sensing object Water (Standard liquid)
(Note 1) Highly viscous liquid may not be stably detected.
(Note 2) The agents mentioned above are examples. It may not be detected depending on viscosity the agent. Before using this device, check the detecting liquid and installation condition.
Power voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption 30 mA or less
Utilization category DC-12, DC-13
Detection output(Leakage detection) PNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: Same as the supply voltage (between detection output and +V)
- Residual voltage: 2.5 V or less (at 50 mA source current)
Detection output(Leakage detection):Response time 10 ms or less
Detection output(Leakage detection):Output operation ON when normal condition or initial detection, OFF when detection leakage or wrong installation Sensing object Water (Standard liquid)

(Note 1) Highly viscous liquid may not be stably detected.

(Note 2) The agents mentioned above are examples. It may not be detected depending on viscosity the agent. Before using this device, check the detecting liquid and installation condition.

Power voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Current consumption 30 mA or less

Utilization category DC-12, DC-13

Detection output(Leakage detection) PNP open-collector transistor

- Maximum source current: 50 mA

- Applied voltage: Same as the supply voltage (between detection output and +V)

- Residual voltage: 2.5 V or less (at 50 mA source current)

Detection output(Leakage detection):Response time 10 ms or less

Detection output(Leakage detection):Output operation ON when normal condition or initial detection, OFF when detection leakage or wrong installation