| Wireless capability | - IEEE 802.11a/n/ac/ax/be, IEEE 802.11b/g/n/ax/be wireless protocols
- 2.4GHz band 4×4 MU-MIMO; 4×4 MU-MIMO in the 5GHz-1 band, 4×4MU-MIMO in the 5GHz-2 band
- Supports 4K QAM
- MLO functionality is supported
- Maximum Merge Ratio (MRC)
- Space-Time Block Code (STBC)
- Cyclic Time-Delay/Cyclic Shift Diversity (CDD/CSD)
- LDPC low-density parity
- Wireless Speed Up Parameter (ShortGI)
- SSID Broadcast/Hide
- Number of SSIDs: 2.4 GHz: 7, 5 GHz 1:7, 5 GHz 2: 7
- Chinese SSID, including GBK and UTF-8 encoding
- Network type: guest network, employee network
- Channel bandwidth settings. 2.4GHz: 20M/40MHz/Auto; 5GHz-1: 20M/40M/80M/160MHz/Auto; 5GHz-2: 20M/40M/80MHz/Auto
- Dynamic Channel Selection (DCS
- Wi-Fi multi-band in one
- Wireless encryption: WPA, WPA2, WPA3, WPA-PSK, WPA2-PSK, WPA3
- User isolation: Isolation between wireless networks and within APs
- Transmit power setting: Lv1-Lv10, 1dBm step
- Isolation between wireless networks and within APs
- Beacon time slot setting
- Limit on the number of wireless clients: Yes
- QoS: WMM, priority-based data processing and forwarding
- WDS: Yes
- Kick out weak signal devices and prohibit weak signal devices from accessing: Yes
- IEEE 802.11k/v/r protocol intelligent roaming
- OFDMA
- TWT
|
| The maximum number of clients that can be associated | - 256（2.4GHz）+256（5GHz-1）+256（5GHz-2）
- Expected Q3 software upgrade supports 512 (2.4GHz) + 512 (5GHz-1) + 512 (5GHz-2)
|
| Network characteristics | - Rate and duplex mode auto-negotiation, automatic MDI/MDI-X
- In FIT mode, offline self-management is supported, and CAPWAP interrupts service maintenance
- LLDP link discovery
- VLANs are assigned based on the SSID to which the user accesses
- Manage VLANs
- Obtain an IP address by using DHCP
- Smart DHCP server
- FAT mode, DHCPv6, IPv6 address access, radiusv6 authentication, and other functions
- FAT mode, DHCPv6, IPv6 address access, radiusv6 authentication, and other functions
|
| Cybersecurity | - FIT mode for portal authentication and MAC address authentication
- WPA, WPA2, WPA-PSK, WPA2-PSK, WPA3 encryption
- Whitelist management of devices that can be accessed
- The SSID is bound to the Tag VLAN
- FIT mode broadcast storm suppression
- DHCP protection in FIT mode
- ARP protection in FIT mode
|
| How it's managed | - FIT mode wireless controller (AC) unified management
- FAT mode is managed independently of web pages
- Centralized management of commercial cloud platforms
- Centralized management of TP-LINK business cloud APP
- Centralized management of TP-LINK network management system (NMS).
|
| System administration | - Device management: full Chinese WEB management
- Username/password management
- Manually set the synchronization time of the active-low NTP server
- Syslog: Yes
- Factory Reset: Yes
- Backup configuration: Yes
- Import Configuration: Yes
- Software Upgrades: Yes
- Ping Watchdog: Yes
- In the first aid mode, the abnormal device enters the first aid page to upgrade the firmware
|
admin - September 12, 2018
roadthemes