AX6000 dual-band Gigabit Wi-Fi 6 outdoor wireless AP

The TL-NXAP6000-GP2 supports IEEE 802.11ax (Wi-Fi 6), a next-generation Wi-Fi standard that builds on existing wireless standards and is designed to address the growing demand for high-bandwidth, multi-user, high-speed, and low-latency Internet access. Based on the current Wi-Fi 5 standard, the TL-NXAP6000-GP2 integrates next-generation features such as OFDMA, UL MU-MIMO, 1024QAM, and 160MHz bandwidth to provide faster speed, higher capacity, and more concurrent connections, and can be widely used in immersive applications such as VR/AR/MR, enterprise 4K high-definition conference and office, and high-density access scenarios for indoor and outdoor massive terminals.

1. Four major improvements brought by Wi-Fi 6 features

The wireless speed has been increased to 6Gbps

With 1024QAM, Long OFDM Symbol, and 160M bandwidth technology, 802.11ax boosts the wireless rate up to 6Gbps to meet the needs of high-speed applications such as VR/AR, 4K, and even 8K streaming.

Network capacity increases

802.11ax uses OFDMA, Spatial Reuse, and DL/UL MU-MIMO technologies to greatly increase the system capacity compared with 802.11ac, and supports TWT technology, allowing APs to uniformly schedule terminal wake-up and sleep activities, reducing conflicts between terminals and unnecessary wake-up times, and meeting the concurrent access requirements of massive terminal devices in crowded scenarios.

Increased coverage

802.11ax effectively reduces terminal packet loss and noise interference, improves terminal reception sensitivity, and increases Wi-Fi coverage through the better Long OFDM symbol transmission mechanism and 2MHz narrowband transmission.

Anti-interference capability is improved

802.11ax supports BSS color coding, dynamic CCA thresholds, and power control to alleviate the problem of co-channel interference in multi-user scenarios and improve spectrum resource utilization.

2. Professional hardware and software design

Independent power amplifier circuit to increase the transmit power

The external independent power amplifier circuit (PA) and low noise power amplifier receiving circuit (LNA) further improve the wireless transmission power, reduce the noise interference of wireless signal reception, and have a wider coverage.

Automatic RF tuning optimizes overall performance

It supports automatic radio calibration, automatically calculates the neighbor relationship between APs in the network, and automatically adjusts the wireless transmit power and channel according to the real-time interference and load conditions of nearby devices, ensuring that the overall wireless network is always in a high-speed and high-performance operation state.

Intelligently kick out weak signal devices to improve wireless quality

You can set a weak signal strength threshold to intelligently identify, prohibit, or kick devices whose signal strength is lower than the threshold. Prevent weak signal devices from slowing down network efficiency and improve the roaming quality of the entire wireless network.

Intelligent roaming technology to enhance the wireless experience of every user

The intelligent roaming technology based on the 802.11kvr protocol helps terminal devices such as mobile phones, pads, and computers to automatically connect to the AP with the best signal quality in high-density environments such as conference rooms, office areas, bars, and KTVs, and achieves fast roaming within 50ms, effectively improving the user experience of each user and the overall performance of the wireless network.

3. High-performance interface

2.5G network port, higher speed Internet access

The 2.5Gbps network port is used, which greatly improves the speed compared with the Gigabit and 100 Gigabit network ports, making the wired interface no longer a bottleneck for wireless transmission and meeting the high-speed Internet access requirements in multi-user and high-bandwidth scenarios.

Gigabit SFP optical port, direct connection is more convenient

One Gigabit SFP fiber module slot is provided to install SFP fiber modules. Optical fiber is directly connected to the AP, which can effectively solve the cabling problem when the AP is far away from the equipment center.

Fourth, the construction is convenient, the management is simple, and the maintenance is worry-free

Multiple power supply methods

a. Standard PoE power supply, more convenient construction

Standard PoE power supply is used, no external power supply is required, and each AP only needs one network cable, which is convenient for construction.

Note: It needs to be used with PoE power supply equipment such as PoE switches and standard PoE power injectors.

b. Passive PoE power supply, power supply transmission distance up to 100 meters

It supports Passive PoE power supply, and the power supply transmission distance can reach 100 meters, which solves the problem of difficult power access in outdoor environments, and flexibly distributes points according to needs.

c. Support 12V~53.5V DC power supply, no need to purchase PoE switches, and reduce networking costs.

Note: This product ships DC power adapter and non-standard PoE power supply module.

Multiple mounting methods

At the same time, it supports pole and wall mounting, and the horizontal and vertical angles can be adjusted, which is simple to install and adapts to more scenarios.

IP68 rated for dust and water resistance

It provides IP68 dustproof and waterproof capabilities, and can work normally in extreme environments as low as -30°C and as high as 65°C, without fear of wind, sun, rain and snow.

Unified management of TP-LINK commercial cloud platform

• Remotely and centrally manage multiple projects, efficient and convenient
• Real-time monitoring of equipment status, timely and accurate alarms
• Graphical data analysis at a glance
• Support mobile APP, management anytime, anywhere

Independent hardware protection circuit, automatically recovering APs that work abnormally

With a built-in independent hardware protection circuit, the AP can automatically recover without manual intervention when the AP is working abnormally, ensuring stable Wi-Fi signal coverage and worry-free maintenance in the later stage.

• Next-generation Wi-Fi 6 (802.11ax) technology 11AX dual-band concurrent with a maximum wireless speed of 5951Mbps
• 2.5G network port, support IEEE 802.3bz Ethernet standard, higher speed Internet access
• Gigabit SFP optical port, direct connection is more convenient
• Built-in 5dBi omnidirectional antenna, independent RF circuit design, covering a radius of up to 500 meters
• The shell design of the professional room can reach IP68 for waterproof and dustproof, and the working temperature can reach -30°C~65°C, which can adapt to various harsh environments
• Automatic RF tuning to optimize overall performance (not supported yet, supported by software updates in the near future)
• Automatically rejects weak signal devices to avoid dragging down the entire network and improve wireless network performance
• Intelligent roaming to improve wireless experience (not supported by 11R yet, supported by software updates in the near future)
• DC, 802.3bt/at PoE and Passive PoE power supply, flexible distribution
• Pole/wall mounting, easy maintenance
• Centralized management of TP-LINK commercial network cloud platform is supported
• It can provide a simpler, more convenient, and more secure network experience for small and medium-sized businesses

Hardware specifications

Software Specifications (FAT AP Mode)