TL-SF1024S is a Layer 2 100 Gigabit unmanaged Ethernet switch product developed by TP-LINK, providing 24 x 10/100M adaptive RJ45 ports, all ports support wire-speed forwarding and MDI/MDIX auto-flip function, and support 19-inch rack mounting.
Port performance
Provides 24 x 10/100M adaptive RJ45 ports, all of which can be forwarded at wire speed.
Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation;
Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control.
Energy saving and environmental protection
The energy-saving technology is used to automatically adjust the signal strength by detecting the length of the network cable and the workload, effectively reducing the power consumption of the product.
Simple to use
The 19-inch standard rack-mount is plug-and-play and requires no management, and dynamic LED indicators provide simple working status prompts and troubleshooting.
Hardware specifications
| Network standards | - IEEE 802.3 、IEEE 802.3u、IEEE 802.3x
|
| Port | - 24 x 10/100Mbps RJ45 ports
|
| Light | - Each port has 1 Link/ACK, Speed indicator
- Each device has 1 Power indicator
|
| Performance | - Store-and-forward
- Supports 8K MAC address table depth
|
| Use environment | - Operating temperature: 0°C~40°C
- Storage temperature: -40°C~70°C
- Operating humidity: 10%~90%RH, non-condensing
- Storage humidity: 5%~90%RH, non-condensing
|
| Enter the power supply | |
| Dimensions(L×W×H) | |
TL-SF1024S is a Layer 2 100 Gigabit unmanaged Ethernet switch product developed by TP-LINK, providing 24 x 10/100M adaptive RJ45 ports, all ports support wire-speed forwarding and MDI/MDIX auto-flip function, and support 19-inch rack mounting.
24 x 10/100M adaptive RJ45 ports
All ports are capable of wire-speed forwarding
Auto MDI/MDIX is supported
Energy-saving technology is used to effectively save energy consumption and extend product life
MAC address self-learning is supported
The low-power fanless design eliminates noise interference and improves product stability
Standard rack mounting, plug and play, no management required
Port performance
Provides 24 x 10/100M adaptive RJ45 ports, all of which can be forwarded at wire speed.
Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation;
Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control.
Energy saving and environmental protection
The energy-saving technology is used to automatically adjust the signal strength by detecting the length of the network cable and the workload, effectively reducing the power consumption of the product.
Simple to use
The 19-inch standard rack-mount is plug-and-play and requires no management, and dynamic LED indicators provide simple working status prompts and troubleshooting.
admin - September 12, 2018
roadthemes