TL-SG1016T is a fully gigabit unmanaged Ethernet switch product independently developed by TP-LINK, providing 16 10/100/1000M RJ45 ports with wire-speed forwarding capability per port. This series of switches provides different working modes for applications such as visual security, diskless boot and wireless networking, and has good network adaptability.
- 16 x 10/100/1000M adaptive RJ45 ports
- All ports are capable of wire-speed forwarding
- Auto MDI/MDIX is supported
- It provides three working modes: standard switching, VLAN isolation, and network cloning
- The switch can be switched by flipping the switch
- Plug and play, rack-mountable
Port performance
16 x 10/100/1000M adaptive RJ45 ports, all ports can achieve wire-speed forwarding.
Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation;
Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control.
Three modes of operation
It provides a mode switching switch, which supports three working modes: "standard switching", "VLAN isolation" and "network cloning", which can optimize and support various application scenarios such as visual security, diskless boot and wireless networking.
Simple to use
19-inch standard rack-mounted, plug-and-play, no management required, and dynamic LED indicators provide simple working status alerts and troubleshooting.
Hardware specifications
| Network standards | - IEEE 802.3 、IEEE 802.3i、IEEE 802.3u、IEEE 802.3ab、IEEE 802.3x
|
| Port | - 16 x 10/100/1000Mbps RJ45 ports
|
| Light | - Each port has 1 Link/ACK, Speed indicator
- Each device has 1 Power indicator
|
| Performance | - Store-and-forward
- Supports 8K MAC address table depth
|
| Use environment | - Operating temperature: 0°C~40°C
- Storage temperature: -40°C~70°C
- Operating humidity: 10%~90%RH, non-condensing
- Storage humidity: 5%~90%RH, non-condensing
|
| Enter the power supply | |
| Dimensions(L×W×H) | |
Software Specifications
| Three-mode switching | - Standard switching, VLAN isolation, and network cloning
|
TL-SG1016T is a fully gigabit unmanaged Ethernet switch product independently developed by TP-LINK, providing 16 10/100/1000M RJ45 ports with wire-speed forwarding capability per port. This series of switches provides different working modes for applications such as visual security, diskless boot and wireless networking, and has good network adaptability.
16 x 10/100/1000M adaptive RJ45 ports
All ports are capable of wire-speed forwarding
Auto MDI/MDIX is supported
It provides three working modes: standard switching, VLAN isolation, and network cloning
The switch can be switched by flipping the switch
Plug and play, rack-mountable
Port performance
16 x 10/100/1000M adaptive RJ45 ports, all ports can achieve wire-speed forwarding.
Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation;
Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control.
Three modes of operation
It provides a mode switching switch, which supports three working modes: "standard switching", "VLAN isolation" and "network cloning", which can optimize and support various application scenarios such as visual security, diskless boot and wireless networking.
Simple to use
19-inch standard rack-mounted, plug-and-play, no management required, and dynamic LED indicators provide simple working status alerts and troubleshooting.
admin - September 12, 2018
roadthemes