The "Bluetooth × Cloud Switching Series" fully gigabit cloud management switch newly developed and launched by TP-LINK provides strong applicability, flexible and fast local management, and efficient, simple and easy-to-use remote management. Using a new generation of high-performance hardware and software platform, with functions such as intelligent deployment, abnormal alarm, VLAN configuration, and port aggregation, it can be easily used by novices without the need for professional IT O&M personnel, and is suitable for network access in application scenarios such as campuses, hotels, and enterprise campuses.
- 24 x 10/100/1000Base-T RJ45 ports
- 2 x 1000Mbps SFP ports
- Compliant with IEEE 802.3af/at PoE power supply standard
- Support remote management of business cloud APP and web
- Support Bluetooth connection on the business cloud APP side, and disconnect network operation and maintenance
- It supports intelligent deployment, abnormal alarms, and fast troubleshooting
- It supports three working modes: cloud management, VLAN isolation, and standard switching
- It supports a maximum PoE power of 225W and a maximum PoE power of a single port of 30W
- 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported
- Supports port aggregation, port monitoring, port traffic statistics, cable detection, and loopback protection
Full Gigabit ports
The TL-NS620-24GP2F provides 24 x 10/100/1000Mbps RJ45 ports and 2 x 1000Mbps SFP ports.
All ports have gigabit wire-speed forwarding capability to meet the needs of different users.
Bluetooth deployment, no network O&M
- Paired with the Shangyun app through the Bluetooth transmission protocol, it can be configured without network conditions
- Support APP for device management, O&M only needs a mobile phone, and on-site troubleshooting is easy and convenient
- Quickly add devices and automatically configure networking
- It provides several ways to add devices, such as device ID filling, MAC address input, QR code scanning, LAN discovery, etc
- Quickly identify other devices connected to the switch, realize automatic networking, intelligent deployment, and graphical topology, which is clear, intuitive, delicate and vivid
View port status in real time, and push alarm exceptions in real time
- Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance
- The abnormal status of the switch network is reported in real time, and the fault location is highlighted at a glance, reducing the difficulty of troubleshooting and greatly improving the operation and maintenance efficiency
The port can be restarted remotely to solve the problem of PoE terminal downtime with one click
When the PoE terminal is down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step.
Standard PoE power supply function
Ports 1~24 of the TL-NS620-24GP2F support PoE+ power supply and comply with the IEEE 802.3af/at standard to meet the needs of various PoE power supply scenarios such as visual security, teleconferencing, and wireless coverage.
The maximum PoE power supply power of the TL-NS620-24GP2F is 225W, and the maximum PoE power supply power of a single port is 30W.
Port aggregation for automatic detection and elimination of loops
Trunk port aggregation doubles the uplink rate.
Intelligent loop protection detects the network topology and repairs loops immediately after they are discovered, effectively preventing network congestion and faults caused by loops.
Simple and practical network management functions
- IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs.
- It supports QoS and optimizes bandwidth configuration based on three priority modes: port, 802.1p, and DSCP.
- Port monitoring is supported, and data packets from the monitored port are copied to other ports for network monitoring.
- Supports port aggregation, increases link bandwidth, implements link backup, and improves link reliability.
One-click to switch working modes
Cloud management mode: The switch supports network management functions such as VLANs, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud APP, commercial cloud platform, and local web. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other.
Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.
Port specifications
| Gigabit RJ45 port | |
| Gigabit SFP port | |
| IEEE 802.3af/at PoE port | |
| Exchange capacity | |
| Packet forwarding rate | |
| The maximum PoE power supply power of the whole machine | |
| The maximum single-port PoE power supply | |
Hardware specifications
| The maximum power consumption of the whole machine | |
| Enter the power supply | |
| Housing dimensions | |
| Use environment | - Operating temperature: 0°C~40°C
- Storage temperature: -40°C~70°C
- Operating humidity: 10%~90% RH non-condensing
- Storage humidity: 5%~90% RH non-condensing
|
Software Specifications
| Cloud management capabilities | - Quick start is supported
- Device information can be reported
- Alarm push is supported
- Remote configuration of devices is supported
|
| Bluetooth management function | - Support scanning code to enter the device
- Port configuration and VLAN configuration are supported
|
| Basic network functions | - Supports port aggregation, port monitoring, port isolation, and port traffic statistics
- 802.1Q VLAN, MTU VLAN, and port VLAN are supported
- Supports QoS, port egress/ingress rate limiting, and storm suppression
- Port flow control, duplex, and enable/disable can be configured
- Supports cable detection and loopback detection
- Supports 8K MAC address capacity
- DHCP Snooping is supported
|
The "Bluetooth × Cloud Switching Series" fully gigabit cloud management switch newly developed and launched by TP-LINK provides strong applicability, flexible and fast local management, and efficient, simple and easy-to-use remote management. Using a new generation of high-performance hardware and software platform, with functions such as intelligent deployment, abnormal alarm, VLAN configuration, and port aggregation, it can be easily used by novices without the need for professional IT O&M personnel, and is suitable for network access in application scenarios such as campuses, hotels, and enterprise campuses.
24 x 10/100/1000Base-T RJ45 ports
2 x 1000Mbps SFP ports
Compliant with IEEE 802.3af/at PoE power supply standard
Support remote management of business cloud APP and web
Support Bluetooth connection on the business cloud APP side, and disconnect network operation and maintenance
It supports intelligent deployment, abnormal alarms, and fast troubleshooting
It supports three working modes: cloud management, VLAN isolation, and standard switching
It supports a maximum PoE power of 225W and a maximum PoE power of a single port of 30W
802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported
Supports port aggregation, port monitoring, port traffic statistics, cable detection, and loopback protection
Full Gigabit ports
The TL-NS620-24GP2F provides 24 x 10/100/1000Mbps RJ45 ports and 2 x 1000Mbps SFP ports.
All ports have gigabit wire-speed forwarding capability to meet the needs of different users.
Bluetooth deployment, no network O&M
Paired with the Shangyun app through the Bluetooth transmission protocol, it can be configured without network conditions
Support APP for device management, O&M only needs a mobile phone, and on-site troubleshooting is easy and convenient
Quickly add devices and automatically configure networking
It provides several ways to add devices, such as device ID filling, MAC address input, QR code scanning, LAN discovery, etc
Quickly identify other devices connected to the switch, realize automatic networking, intelligent deployment, and graphical topology, which is clear, intuitive, delicate and vivid
View port status in real time, and push alarm exceptions in real time
Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance
The abnormal status of the switch network is reported in real time, and the fault location is highlighted at a glance, reducing the difficulty of troubleshooting and greatly improving the operation and maintenance efficiency
The port can be restarted remotely to solve the problem of PoE terminal downtime with one click
When the PoE terminal is down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step.
Standard PoE power supply function
Ports 1~24 of the TL-NS620-24GP2F support PoE+ power supply and comply with the IEEE 802.3af/at standard to meet the needs of various PoE power supply scenarios such as visual security, teleconferencing, and wireless coverage.
The maximum PoE power supply power of the TL-NS620-24GP2F is 225W, and the maximum PoE power supply power of a single port is 30W.
Port aggregation for automatic detection and elimination of loops
Trunk port aggregation doubles the uplink rate.
Intelligent loop protection detects the network topology and repairs loops immediately after they are discovered, effectively preventing network congestion and faults caused by loops.
Simple and practical network management functions
IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs.
It supports QoS and optimizes bandwidth configuration based on three priority modes: port, 802.1p, and DSCP.
Port monitoring is supported, and data packets from the monitored port are copied to other ports for network monitoring.
Supports port aggregation, increases link bandwidth, implements link backup, and improves link reliability.
One-click to switch working modes
Cloud management mode: The switch supports network management functions such as VLANs, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud APP, commercial cloud platform, and local web. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other.
Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.
admin - September 12, 2018
roadthemes