TL-SH1206 is a 10 Gigabit uplink Ethernet switch independently developed by TP-LINK, providing four 2.5G/1Gbps RJ45 ports and two 10 Gigabit SFP+ optical ports, supporting two working modes: standard switching and VLAN isolation.
- Provides 4 x 2.5G/1Gbps RJ45 ports
- Provides two 10 Gigabit uplink SFP+ optical ports
- All ports support wire-speed forwarding and automatic rollover
- It supports standard switching and VALN isolation working modes
- Plug and play, rack-mountable
- IEEE 802.3ae, 802.3bz, and 802.3ab protocols are supported
Port performance
It provides 4 x 2.5G/1Gbps adaptive RJ45 ports and 2 x 10 Gigabit SFP+ optical ports, all of which support wire-speed forwarding.
Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation;
Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control.
VLAN isolation, one-click switching
It provides a mode switching switch, which supports two working modes: "standard switching" and "VLAN isolation", which users can choose according to the usage scenario.
Plug and play, simple to use
The 19-inch standard rack-mount is plug-and-play and requires no management, and dynamic LED indicators provide simple working status prompts and troubleshooting.
Hardware specifications
| Network standards | - IEEE 802.3 、IEEE 802.3 i、IEEE 802.3u、IEEE 802.3ab、IEEE 802.3 z，IEEE 802.3x
|
| Port | - 4 x 2.5G/1Gbps RJ45 ports
- 2 10 Gigabit SFP+ optical ports
|
| Light | - Each port has 1 Speed/Link/Ack indicator
- Each device has 1 Power indicator
|
| Performance | - Store-and-forward
- A MAC address table depth of 16K is supported
|
| Use environment | - Operating temperature: 0°C~40°C
- Storage temperature: -40°C~70°C
- Operating humidity: 10%~90%RH, non-condensing
- Storage humidity: 5%~90%RH, non-condensing
|
| Enter the power supply | |
| Dimensions(L×W×H) | |
Software Specifications
| Three-mode switching | - Standard switching, VLAN isolation
|
TL-SH1206 is a 10 Gigabit uplink Ethernet switch independently developed by TP-LINK, providing four 2.5G/1Gbps RJ45 ports and two 10 Gigabit SFP+ optical ports, supporting two working modes: standard switching and VLAN isolation.
Provides 4 x 2.5G/1Gbps RJ45 ports
Provides two 10 Gigabit uplink SFP+ optical ports
All ports support wire-speed forwarding and automatic rollover
It supports standard switching and VALN isolation working modes
Plug and play, rack-mountable
IEEE 802.3ae, 802.3bz, and 802.3ab protocols are supported
Port performance
It provides 4 x 2.5G/1Gbps adaptive RJ45 ports and 2 x 10 Gigabit SFP+ optical ports, all of which support wire-speed forwarding.
Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation;
Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control.
VLAN isolation, one-click switching
It provides a mode switching switch, which supports two working modes: "standard switching" and "VLAN isolation", which users can choose according to the usage scenario.
Plug and play, simple to use
The 19-inch standard rack-mount is plug-and-play and requires no management, and dynamic LED indicators provide simple working status prompts and troubleshooting.
admin - September 12, 2018
roadthemes