TL-SG2005P-P60 is a fully gigabit cloud-managed PoE power supply and receiver all-in-one machine independently developed by TP-LINK, which integrates PoE power supply and PoE power reception, providing 5 Gigabit RJ45 ports, including 1-4 The port supports PoE power supply, and port 5 supports PoE power supply. The device meets the IEEE 802.3af/at standard, the maximum PoE output power of the whole machine is 53W. Connect the upper-level PoE power-out (PSE) device to the lower-level PoE power-receiving (PD) device to extend the data transmission distance and achieve multi-port long-distance PoE power supply. Plug and play, no configuration required, simple and convenient to use, to meet the needs of PoE power supply in scenarios such as visual security and wireless coverage.
- 5 x 10/100/1000Base-T RJ45 ports
- Gigabit RJ45 ports 1~4 support IEEE 802.3af/at standard PoE power supply
- Port 5 supports IEEE 802.3af/at/bt standard PoE power supply
- The maximum PoE power supply power of the whole machine is 53W, and the maximum PoE power supply power of a single port is 30W
- Support remote management of business cloud APP and web
- It supports intelligent deployment, abnormal alarms, and fast troubleshooting
- 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported
- Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection
Full Gigabit ports
PoE power supply and PoE power receiving integration
- 1-4 ports support PoE power supply to meet the needs of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage.
- Port 5 supports PoE power receiving and can be powered directly through the network cable, without the need for an external power supply.
- It complies with IEEE 802.3af/at PoE power supply standard, and the maximum PoE output power of the whole machine is 53W.
- Automatically identify PoE devices for power supply without damaging non-PoE devices.
- As a relay for the upper-level PoE power-out (PSE) device and the lower-level PoE power-receiving (PD), it enables multi-port long-distance PoE power supply while extending the data transmission distance.
It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted
Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient.
It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client.
Scan the code to add devices with one click and automatically configure the networking
Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch.
Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand.
View port status in real time and provide timely alarms for exceptions
Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance.
Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency.
PoE port restart is supported, and the PoE terminal is downtime with one click
When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort.
Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated
Port aggregation is supported, which can provide higher uplink rates.
Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops.
Simple and practical network management functions
IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs.
It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration.
Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring.
Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface.
| Product model | TL-SG2226P | TL-SG2218P | TL-SG2210P | TL-SG2005P | TL-SG2005P-P60 |
| Gigabit RJ45 port | 24 | 16 | 9 | 5 | 5 |
| Gigabit SFP port | 2 | 2 | 1 | 0 | 0 |
| PoE port | 24 | 16 | 8 | 4 | 4 x PoE power supply ports 1*PoE power receiving port |
| The maximum PoE output power of the whole machine | 225W | 180W | 57W | 60W | 53W |
| The maximum power consumption of the whole machine | 263W | 213W | 68W | 65W | 60W |
| The maximum PoE output power of the port | 30W |
| PoE power supply standard | IEEE 802.3af/at |
| MAC address capacity | 8K | 8K | 4K | 2K | 2K |
| Mode switch | It supports three working modes: cloud management, VLAN isolation, and standard switching | not |
| Network management features | - It supports remote management through the business cloud APP and the business cloud network cloud platform (web terminal).
- Local web management is supported
- 802.1Q VLAN, MTU VLAN, and port VLAN are supported
- Port flow control, duplex, and enable/disable can be configured
- Supports port aggregation, port monitoring, port isolation, and port traffic statistics
- DHCP Snooping (except 5/8 port models)
- Supports QoS, port egress/ingress rate limiting, and storm suppression
- Supports cable detection and loopback detection
|
| Business cloud capabilities | - Quick start is supported
- Device information can be reported
- Alarm push is supported
- Supports remote O&M of devices
|
| Housing size(mm) | 440*180*44 | 294*180*44 | 171*98*27 | 100*98*25 | 100*98*25 |
| Enter the power supply | 220VAC， 50Hz | 220VAC， 50Hz | 53.5VDC/1.22A | 53.5VDC/1.22A | PoE power supply 50-57V/1.2A |
| Use environment | - Operating temperature: 0°C~40°C
- Storage temperature: -40°C~70°C
- Operating humidity: 10%~90% RH non-condensing
- Storage humidity: 5%~90% RH non-condensing
|
TL-SG2005P-P60 is a fully gigabit cloud-managed PoE power supply and receiver all-in-one machine independently developed by TP-LINK, which integrates PoE power supply and PoE power reception, providing 5 Gigabit RJ45 ports, including 1-4 The port supports PoE power supply, and port 5 supports PoE power supply. The device meets the IEEE 802.3af/at standard, the maximum PoE output power of the whole machine is 53W. Connect the upper-level PoE power-out (PSE) device to the lower-level PoE power-receiving (PD) device to extend the data transmission distance and achieve multi-port long-distance PoE power supply. Plug and play, no configuration required, simple and convenient to use, to meet the needs of PoE power supply in scenarios such as visual security and wireless coverage.
5 x 10/100/1000Base-T RJ45 ports
Gigabit RJ45 ports 1~4 support IEEE 802.3af/at standard PoE power supply
Port 5 supports IEEE 802.3af/at/bt standard PoE power supply
The maximum PoE power supply power of the whole machine is 53W, and the maximum PoE power supply power of a single port is 30W
Support remote management of business cloud APP and web
It supports intelligent deployment, abnormal alarms, and fast troubleshooting
802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported
Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection
Full Gigabit ports
The TL-SG2005P-P60 provides five 10/100/1000Mbps RJ45 ports.
All ports have gigabit wire-speed forwarding capability to meet the needs of different users.
PoE power supply and PoE power receiving integration
1-4 ports support PoE power supply to meet the needs of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage.
Port 5 supports PoE power receiving and can be powered directly through the network cable, without the need for an external power supply.
It complies with IEEE 802.3af/at PoE power supply standard, and the maximum PoE output power of the whole machine is 53W.
Automatically identify PoE devices for power supply without damaging non-PoE devices.
As a relay for the upper-level PoE power-out (PSE) device and the lower-level PoE power-receiving (PD), it enables multi-port long-distance PoE power supply while extending the data transmission distance.
It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted
Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient.
It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client.
Scan the code to add devices with one click and automatically configure the networking
Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch.
Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand.
View port status in real time and provide timely alarms for exceptions
Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance.
Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency.
PoE port restart is supported, and the PoE terminal is downtime with one click
When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort.
Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated
Port aggregation is supported, which can provide higher uplink rates.
Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops.
Simple and practical network management functions
IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs.
It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration.
Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring.
Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface.
admin - September 12, 2018
roadthemes