TL-SG1226 is a Layer 2 fully gigabit unmanaged Ethernet switch product independently developed by TP-LINK, providing 24 x 10/100/1000M RJ45 ports and 2 Gigabit SFP fiber module expansion slots, with line-speed forwarding capability per port. This series of switches provides different working modes for applications such as visual security, diskless boot and wireless networking, and has good network adaptability.
- 24 x 10/100/1000M adaptive RJ45 ports, 2 x Gigabit SFP fiber module expansion slots
- All ports are capable of wire-speed forwarding
- Auto MDI/MDIX is supported
- It provides three working modes: standard switching, VLAN isolation, and network cloning to adapt to different network environments
- The switch can be switched by flipping the switch
- Plug and play, rack-mountable
Port performance
It provides 24 x 10/100/1000M adaptive RJ45 ports and 2 Gigabit SFP fiber module expansion slots, all ports can achieve wire-speed forwarding.
Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation;
Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control.
Three modes of operation
It provides a mode switching switch, which supports three working modes: "standard switching", "VLAN isolation" and "network cloning", which can optimize and support various application scenarios such as visual security, diskless boot and wireless networking.
Simple to use
The 19-inch standard rack-mount is plug-and-play and requires no management, and dynamic LED indicators provide simple working status prompts and troubleshooting.
Hardware specifications
| Network standards | - IEEE 802.3 、IEEE 802.3 i、IEEE 802.3u、IEEE 802.3ab、IEEE 802.3 z，IEEE 802.3x
|
| Port | - 24 x 10/100/1000Mbps RJ45 ports
- 2 Gigabit SFP fiber module expansion slots
|
| Light | - Each port has 1 Link/Ack indicator
- Each device has 1 Power indicator
|
| Performance | - Store-and-forward
- Supports 8K MAC address table depth
|
| Use environment | - Operating temperature: 0°C~40°C
- Storage temperature: -40°C~70°C
- Operating humidity: 10%~90%RH, non-condensing
- Storage humidity: 5%~90%RH, non-condensing
|
| Enter the power supply | |
| Dimensions(L×W×H) | |
Software Specifications
| Three-mode switching | - Standard switching, VLAN isolation, and network cloning
|
TL-SG1226 is a Layer 2 fully gigabit unmanaged Ethernet switch product independently developed by TP-LINK, providing 24 x 10/100/1000M RJ45 ports and 2 Gigabit SFP fiber module expansion slots, with line-speed forwarding capability per port. This series of switches provides different working modes for applications such as visual security, diskless boot and wireless networking, and has good network adaptability.
24 x 10/100/1000M adaptive RJ45 ports, 2 x Gigabit SFP fiber module expansion slots
All ports are capable of wire-speed forwarding
Auto MDI/MDIX is supported
It provides three working modes: standard switching, VLAN isolation, and network cloning to adapt to different network environments
The switch can be switched by flipping the switch
Plug and play, rack-mountable
Port performance
It provides 24 x 10/100/1000M adaptive RJ45 ports and 2 Gigabit SFP fiber module expansion slots, all ports can achieve wire-speed forwarding.
Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation;
Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control.
Three modes of operation
It provides a mode switching switch, which supports three working modes: "standard switching", "VLAN isolation" and "network cloning", which can optimize and support various application scenarios such as visual security, diskless boot and wireless networking.
Simple to use
The 19-inch standard rack-mount is plug-and-play and requires no management, and dynamic LED indicators provide simple working status prompts and troubleshooting.
admin - September 12, 2018
roadthemes