1167Mbps AC1200 dual-band outdoor wireless AP

• 11AC dual-band concurrency, the maximum wireless rate can reach 1167Mbps
• External 5dBi omnidirectional antenna, covering a radius of up to 200 meters
• The shell design of the professional room can reach IP65 level of waterproof and dustproof, and the working temperature can reach -30°C~65°C, which can adapt to various harsh environments
• Spectrum navigation for better load balance in the 2.4GHz and 5GHz bands
• The power is linearly adjustable, effectively reducing mutual interference between APs
• Automatically rejects weak signal devices to avoid dragging down the entire network and improve wireless network performance
• Independent hardware protection circuit, which can automatically restore abnormal APs
• Passive PoE network cable power supply, flexible distribution
• Pole/wall mounting, flexible and simple

Hardware specifications

Product model	TL-AP1201P
Installation:	Pole/wall mounting
Size	209*95*43mm
Wireless	2.4GHz frequency band: 300Mbps 5GHz band: 867Mbps
Port	1 x 10/100Mbps RJ45 port 1 DC interface
Antenna	External 5dBi dual-band waterproof detachable omnidirectional antenna
Antenna coverage angle	360°
Light	1 system indicator
Button	1 RESET button 1 x FAT/FIT mode toggle switch
Power supply	12VDC/1A。 It supports Passive PoE power supply at a distance of up to 40 meters
Manage	FIT AP MODE: MANAGED BY TP-LINK WIRELESS CONTROLLER (AC). FAT AP mode: independent web page management
Environmental protection	IP65 rated for dust and water resistance
Use environment	Operating temperature: -30°C~65°C Operating humidity: 10%~90%RH non-condensing Storage temperature: -40°C~70°C Storage humidity: 5%~90%RH non-condensing
Recommended Coverage Distance (Open Environment)	2.4G: 100 meters 5G: 200 meters (the actual coverage distance may vary when used with different wireless terminals)

Software Specifications (FAT AP Mode)

Wireless capability	SSID Broadcast: Yes Number of SSIDs: 8 (2.4 GHz) + 8 (5 GHz) Network type: guest network, employee network Wireless encryption: WPA, WPA2, WPA-PSK, WPA2-PSK User isolation: Isolation between wireless networks and within APs Wireless MAC address filtering: whitelist supported(50) VLAN settings: SSID and Tag VLAN bindings are supported Transmit power setting: support 1dBm linear adjustment WDS Function: Yes Limit on the number of wireless clients: Yes QoS：WMM Kick out weak signal devices and prohibit weak signal devices from accessing: Yes
System administration	Device management: full Chinese WEB management Syslog: Yes Factory Reset: Yes Backup configuration: Yes Import Configuration: Yes Software Upgrades: Yes Ping Watchdog: Yes
Wireless belt capacity is recommended	25（2.4G）+45（5G）
Maximum wireless belt capacity	100（2.4G）+100（5G）

11AC dual-band concurrency, the maximum wireless rate can reach 1167Mbps
External 5dBi omnidirectional antenna, covering a radius of up to 200 meters
The shell design of the professional room can reach IP65 level of waterproof and dustproof, and the working temperature can reach -30°C~65°C, which can adapt to various harsh environments
Spectrum navigation for better load balance in the 2.4GHz and 5GHz bands
The power is linearly adjustable, effectively reducing mutual interference between APs
Automatically rejects weak signal devices to avoid dragging down the entire network and improve wireless network performance
Independent hardware protection circuit, which can automatically restore abnormal APs
Passive PoE network cable power supply, flexible distribution
Pole/wall mounting, flexible and simple