TL-XAP5407GC-PoE/DC is a new generation of AX5400 Wi-Fi 6 indoor ceiling AP launched by TP-LINK, providing 2.5G network port for data transmission, with a wireless rate of up to 5378Mbps. It provides DC and standard PoE power supply modes, and the networking form is more flexible, which can be widely used in indoor scenarios such as restaurants, hotel lobbies, warehouses, and small businesses, providing high-quality wireless coverage.
1. Adopt 11AX (Wi-Fi 6) wireless technology
Dual-band concurrency, 5378Mbps wireless rate
It supports 2.4G/5G dual-band concurrency, with a wireless transmission rate of 574Mbps in the 2.4GHz band and 4804Mbps in the 5GHz band, and a built-in omnidirectional high-gain dual-polarization antenna.
2. Professional hardware and software design
It supports wireless MESH networking, making it more convenient to expand blind spot signal coverage
Through TP-LINK MESH technology, the network can be wirelessly expanded by pressing a button, and some areas can be wired without wiring to achieve wireless signal expansion, which is suitable for small and medium-sized environments with low traffic density, easy to use and unified configuration.
Automatic RF tuning optimizes overall performance
It supports automatic radio calibration, automatically calculates the neighbor relationship between APs in the network, and automatically adjusts the wireless transmit power and channel according to the real-time interference and load conditions of nearby devices, ensuring that the overall wireless network is always in a high-speed and high-performance operation state.
Intelligently kick out weak signal devices to improve wireless quality
You can set a weak signal strength threshold to intelligently identify, prohibit, or kick devices whose signal strength is lower than the threshold. Prevent weak signal devices from slowing down network efficiency and improve the roaming quality of the entire wireless network.
Intelligent roaming technology to enhance the wireless experience of every user
The intelligent roaming technology based on the 802.11kvr protocol helps terminal devices such as mobile phones, pads, and computers automatically connect to the AP with the best signal quality in high-density environments such as conference rooms, office areas, bars, and KTVs, so as to achieve fast roaming, effectively improving the user experience of each user and the overall performance of the wireless network.
3. High-performance interface
2.5G network port, higher speed Internet access
The 2.5Gbps network port is used, which greatly improves the speed compared with the Gigabit network port, making the wired interface no longer a bottleneck for wireless transmission and meeting the high-speed Internet access requirements in multi-user and high-bandwidth scenarios.
Fourth, the construction is convenient, the management is simple, and the maintenance is worry-free
Multiple power supply methods
a. Standard PoE power supply, more convenient construction
Standard PoE power supply is used, no external power supply is required, and each AP only needs one network cable, which is convenient for construction.
Note: It needs to be used with PoE power supply equipment such as PoE switches and standard PoE power injectors.
b. Support 12V DC power supply, no need to purchase PoE switches, and reduce networking costs.
Note: If you need to use DC power supply, please purchase a 12V/2A DC power adapter.
Multiple mounting methods
At the same time, it supports ceiling and wall mounting, which is simple to install and adapts to more scenarios.
Unified management of TP-LINK commercial cloud platform
Remotely and centrally manage multiple projects, efficient and convenient
Real-time monitoring of equipment status, timely and accurate alarms
Graphical data analysis at a glance
Support mobile APP, management anytime, anywhere
Independent hardware protection circuit, automatically recovering APs that work abnormally
With a built-in independent hardware protection circuit, the AP can automatically recover without manual intervention when the AP is working abnormally, ensuring stable Wi-Fi signal coverage and worry-free maintenance in the later stage.
- Next-generation Wi-Fi 6 (802.11ax) technology
- 11AX dual-band concurrency, the maximum wireless speed can reach 5378Mbps
- It supports easy-to-expand MESH networking, and the sub-nodes are free of wiring, making it more convenient to cover blind spot signal expansion
- The wireless transmit power is linearly adjustable, and the signal coverage is adjusted according to the demand
- Professional dual-band antenna to improve the signal quality of the coverage area
- Spectrum navigation guides dual-band clients to connect to the 5 GHz band preferentially, so that the load of the 2.4 GHz and 5 GHz frequency bands is more balanced and network performance is ensured
- Easy in-ceiling installation, supporting both 802.3at standard PoE and 12VDC power supply
- 2.5G network port, port hidden shell, beautiful wiring
- Fat and thin are integrated, and different working modes are selected in different environments
- Independent hardware protection circuit, which can automatically restore abnormal APs
- FIT mode supports automatic radio calibration
- FIT mode supports intelligent roaming technology
- Centralized management of TP-LINK commercial network cloud platform is supported
- Support TP-LINK business cloud APP remote viewing/management
- It can provide a simpler, more convenient, and more secure network experience for small and medium-sized businesses
Hardware specifications
| Product model | - TL-XAP5407GC-PoE/DC Easy Edition
|
| Installation: | |
| Size | |
| Wireless | - 2.4GHz band: 574 Mbps
- 5GHz band: 4804 Mbps
|
| Port | - 1 x 10/100/1000/2500M RJ45 port
- 1 DC port
|
| Light | |
| Button | - 1 Reset button
- 1 x FAT/FIT mode toggle switch
- 1 easy-to-expand button
|
| Power supply mode | - 802.3at standard PoE power supply
- 12V/2A DC power supply (power adapter not shipped from the factory)
|
| Power consumption of the whole machine | - Maximum power consumption of PoE power supply: 24.25W
|
| Manage | - FIT AP MODE: MANAGED BY TP-LINK WIRELESS CONTROLLER (AC).
- FAT AP mode: independent web page management
- TP-LINK commercial network cloud platform is centrally managed
|
| Use environment | - Operating temperature: 0°C~40°C
- Operating humidity: 10%~90%RH non-condensing
- Storage temperature: -40°C~70°C
- Storage humidity: 5%~90%RH non-condensing
|
Software Specifications (FAT AP Mode)
| Wireless capability | - SSID Broadcast: Yes
- Number of SSIDs: 7 (2.4GHz) + 7 (5GHz), support Chinese SSID
- Network type: guest network, employee network
- Wireless encryption: WPA, WPA2, WPA3, WPA-PSK, WPA2-PSK
- User isolation: Isolation between wireless networks and within APs
- Wireless MAC address filtering: whitelist (100)
- VLAN settings: SSID and Tag VLAN bindings are supported
- Transmit power setting: support 1dBm linear adjustment
- Limit on the number of wireless clients: Yes
- QoS：WMM
- WDS: Yes
- Kick out weak signal devices and prohibit weak signal devices from accessing: Yes
|
| The maximum number of clients that can be associated | |
| System administration | - Device management: full Chinese WEB management
- Syslog: Yes
- Factory Reset: Yes
- Backup configuration: Yes
- Import Configuration: Yes
- Software Upgrades: Yes
- Ping Watchdog: Yes
|
TL-XAP5407GC-PoE/DC is a new generation of AX5400 Wi-Fi 6 indoor ceiling AP launched by TP-LINK, providing 2.5G network port for data transmission, with a wireless rate of up to 5378Mbps. It provides DC and standard PoE power supply modes, and the networking form is more flexible, which can be widely used in indoor scenarios such as restaurants, hotel lobbies, warehouses, and small businesses, providing high-quality wireless coverage.
1. Adopt 11AX (Wi-Fi 6) wireless technology
Dual-band concurrency, 5378Mbps wireless rate
It supports 2.4G/5G dual-band concurrency, with a wireless transmission rate of 574Mbps in the 2.4GHz band and 4804Mbps in the 5GHz band, and a built-in omnidirectional high-gain dual-polarization antenna.
2. Professional hardware and software design
It supports wireless MESH networking, making it more convenient to expand blind spot signal coverage
Through TP-LINK MESH technology, the network can be wirelessly expanded by pressing a button, and some areas can be wired without wiring to achieve wireless signal expansion, which is suitable for small and medium-sized environments with low traffic density, easy to use and unified configuration.
Automatic RF tuning optimizes overall performance
It supports automatic radio calibration, automatically calculates the neighbor relationship between APs in the network, and automatically adjusts the wireless transmit power and channel according to the real-time interference and load conditions of nearby devices, ensuring that the overall wireless network is always in a high-speed and high-performance operation state.
Intelligently kick out weak signal devices to improve wireless quality
You can set a weak signal strength threshold to intelligently identify, prohibit, or kick devices whose signal strength is lower than the threshold. Prevent weak signal devices from slowing down network efficiency and improve the roaming quality of the entire wireless network.
Intelligent roaming technology to enhance the wireless experience of every user
The intelligent roaming technology based on the 802.11kvr protocol helps terminal devices such as mobile phones, pads, and computers automatically connect to the AP with the best signal quality in high-density environments such as conference rooms, office areas, bars, and KTVs, so as to achieve fast roaming, effectively improving the user experience of each user and the overall performance of the wireless network.
3. High-performance interface
2.5G network port, higher speed Internet access
The 2.5Gbps network port is used, which greatly improves the speed compared with the Gigabit network port, making the wired interface no longer a bottleneck for wireless transmission and meeting the high-speed Internet access requirements in multi-user and high-bandwidth scenarios.
Fourth, the construction is convenient, the management is simple, and the maintenance is worry-free
Multiple power supply methods
a. Standard PoE power supply, more convenient construction
Standard PoE power supply is used, no external power supply is required, and each AP only needs one network cable, which is convenient for construction.
Note: It needs to be used with PoE power supply equipment such as PoE switches and standard PoE power injectors.
b. Support 12V DC power supply, no need to purchase PoE switches, and reduce networking costs.
Note: If you need to use DC power supply, please purchase a 12V/2A DC power adapter.
Multiple mounting methods
At the same time, it supports ceiling and wall mounting, which is simple to install and adapts to more scenarios.
Unified management of TP-LINK commercial cloud platform
Remotely and centrally manage multiple projects, efficient and convenient
Real-time monitoring of equipment status, timely and accurate alarms
Graphical data analysis at a glance
Support mobile APP, management anytime, anywhere
Independent hardware protection circuit, automatically recovering APs that work abnormally
With a built-in independent hardware protection circuit, the AP can automatically recover without manual intervention when the AP is working abnormally, ensuring stable Wi-Fi signal coverage and worry-free maintenance in the later stage.
Next-generation Wi-Fi 6 (802.11ax) technology
11AX dual-band concurrency, the maximum wireless speed can reach 5378Mbps
It supports easy-to-expand MESH networking, and the sub-nodes are free of wiring, making it more convenient to cover blind spot signal expansion
The wireless transmit power is linearly adjustable, and the signal coverage is adjusted according to the demand
Professional dual-band antenna to improve the signal quality of the coverage area
Spectrum navigation guides dual-band clients to connect to the 5 GHz band preferentially, so that the load of the 2.4 GHz and 5 GHz frequency bands is more balanced and network performance is ensured
Easy in-ceiling installation, supporting both 802.3at standard PoE and 12VDC power supply
2.5G network port, port hidden shell, beautiful wiring
Fat and thin are integrated, and different working modes are selected in different environments
Independent hardware protection circuit, which can automatically restore abnormal APs
FIT mode supports automatic radio calibration
FIT mode supports intelligent roaming technology
Centralized management of TP-LINK commercial network cloud platform is supported
Support TP-LINK business cloud APP remote viewing/management
It can provide a simpler, more convenient, and more secure network experience for small and medium-sized businesses
admin - September 12, 2018
roadthemes