AX5400 Dual-Band Wi-Fi 6 Outdoor Wireless AP

TL-XAP5402GP is a new generation of AX5400 high-power outdoor AP launched by TP-LINK, which provides Gigabit Ethernet port and 2.5G optical port for data transmission, and provides DC, standard PoE, and Passive PoE power supply modes, providing flexible networking. It can be widely used in outdoor scenarios such as squares, parks, stations, and stadiums to provide high-quality wireless coverage.

1. Adopt 11Ax wireless technology
Dual-band concurrency, 5378Mbps wireless rate
Support 2.4G/5G dual-band concurrency, 2.4GHz frequency band provides 574Mbps wireless transmission rate, 5GHz frequency band provides 4804Mbps wireless transmission rate, built-in omnidirectional high-gain dual-polarization antenna.

2. Professional hardware and software design
Support wireless MESH networking, blind spot signal coverage expansion
is more convenient Through TP-LINK MESH technology, the network can be expanded wirelessly by pressing a button, and some areas can be wired without wiring to achieve wireless signal expansion, which is suitable for small and medium-sized environments with low traffic density, easy to use and unified configuration.

Independent power amplifier circuit to improve transmission power The
external independent power amplifier circuit (PA) and low noise power amplifier receiving circuit (LNA: Low Noise Amplifier) further improve the wireless transmission power, reduce the noise interference of wireless signal reception, and cover a wider range.

Automatic RF Tuning Optimizes Overall Performance
Automatic RF tuning, automatically calculates the neighbor relationship between APs in the network, and automatically adjusts the wireless transmit power and channel based on the real-time interference and load conditions of nearby devices, ensuring that the overall wireless network is always in a high-speed, high-performance operation state.

Intelligently Kick Weak Signal Devices to Improve Wireless Quality
You can set a weak signal strength threshold to intelligently identify, prohibit, and kick devices whose signal strength is lower than the threshold. Prevent weak signal devices from slowing down network efficiency and improve the roaming quality of the entire wireless network.

Intelligent roaming technology improves the wireless experience of each user
The intelligent roaming technology based on the 802.11kvr protocol helps mobile phones, pads, computers and other terminal devices to automatically connect to the AP with the best signal quality in the high-density environment of multiple APs such as conference rooms, office areas, bars, and KTVs, and realizes fast roaming within 50ms. Effectively improve the user experience of each user and the overall performance of the wireless network.

3. High-performance interface
Gigabit network port, higher speed Internet access
The 1000Mbps network port is adopted, which greatly improves the speed compared with the 100 Gigabit network port, making the wired interface no longer a bottleneck for wireless transmission and meeting the high-speed Internet access needs in multi-user and high-bandwidth scenarios.

2.5G SFP optical port, more convenient direct connection
One 2.5G SFP fiber module slot is provided to install SFP fiber modules. Optical fiber is directly connected to the AP, which can effectively solve the cabling problem when the AP is far away from the equipment center.

Fourth, the construction is convenient, the management is simple, the maintenance
is worry-free A variety of power supply methods
a, standard PoE power supply, more convenient construction
Standard PoE power supply, no external power supply, each AP only needs one network cable, convenient construction.
Note: It needs to be used with PoE power supply equipment such as PoE switches and standard PoE power injectors.

b. Passive PoE power supply, power supply transmission distance up to 100 meters
Support Passive PoE power supply, power supply transmission distance up to 100 meters, solve the problem of difficult power access in outdoor environment, and flexibly distribute points according to needs.

c. Support 12V~53.5V DC power supply, no need to purchase PoE switches, and reduce networking costs.
Note: This product ships DC power adapter and non-standard PoE power supply module.

A variety of installation methods
support pole and wall mounting at the same time, and the horizontal and vertical angles can be adjusted, which is simple to install and adapts to more scenarios.

IP68 Dustproof and Waterproof
It provides IP68 dustproof and waterproof capabilities, and can work normally in extreme environments as low as -30°C and as high as 65°C, without fear of wind, sun, rain and snow.

Unified management of TP-LINK commercial cloud platform
Remote centralized management of multiple projects, efficient and convenient
Real-time monitoring of equipment status, timely and accurate alarms
Graphical data analysis, clear at a glance
Support mobile APP, management anytime, anywhere

Independent Hardware Protection Circuit, Automatic Recovery of AP Abnormal Work
Built-in independent hardware protection circuit, when the AP works abnormally, it can be automatically restored without manual intervention, ensuring stable Wi-Fi signal coverage and more worry-free maintenance in the later stage.

• Next-generation Wi-Fi 6 (802.11ax) technology
• 11AX dual-band concurrency, the maximum wireless speed can reach 5378Mbps
• The 2.5G SFP optical port provides faster Internet access and more convenient direct connection
• Built-in 5dBi omnidirectional antenna, independent RF circuit design, covering a radius of up to 500 meters
• The shell design of the professional room can reach IP68 for waterproof and dustproof, and the working temperature can reach -30°C~65°C, which can adapt to various harsh environments
• Automatic RF tuning optimizes overall performance
• Automatically rejects weak signal devices to avoid dragging down the entire network and improve wireless network performance
• DC, 802.3bt/at PoE and Passive PoE power supply, flexible distribution
• Pole/wall mounting, easy maintenance
• Centralized management of TP-LINK commercial network cloud platform is supported
• It can provide a simpler, more convenient, and more secure network experience for small and medium-sized businesses

Hardware specifications

Product model	TL-XAP5402GP Omnidirectional Easy Display
Installation:	Pole/wall mounting
Size	360×360×73mm
Wireless	2.4GHz frequency band: 574Mbps 5GHz band: 4804Mbps
Port	1 x 100/1000M/2500Mbps SFP interface 1 x 10/100/1000Mbps RJ45 interface 1 DC interface
Antenna	Built-in 5dBi omnidirectional antenna
Antenna coverage angle	360°
Light	1 system indicator 1 x SFP indicator
Button	1 RESET button 1 x FAT/FIT mode toggle switch 1 easy-to-unroll button
Power supply	53.5VDC/0.81A Passive PoE power supply, power supply distance up to 100M IEEE 802.3bt/at standard PoE power supply 12-53.5V DC power supply
Manage	FIT AP MODE: MANAGED BY TP-LINK WIRELESS CONTROLLER (AC). FAT AP mode: independent web page management
Environmental protection	IP68 rated for dust and water resistance
Use environment	Operating temperature: -30°C~65°C Operating humidity: 10%~90%RH non-condensing Storage temperature: -40°C~70°C Storage humidity: 5%~90%RH non-condensing
Recommended Coverage Distance (Open Environment)	2.4G: 300 meters; 5G: 500 meters (actual coverage distance may vary when working with different wireless terminals)
The maximum power consumption of the whole machine	28W
Lightning protection function	In the tank

Software Specifications (FAT AP Mode)

Wireless capability

SSID Broadcast: Yes Number of SSIDs: 8 (2.4 GHz) + 8 (5 GHz) Network type: guest network, employee network Wireless encryption: WPA, WPA2, WPA-PSK, WPA2-PSK User isolation: Isolation between wireless networks and within APs Wireless MAC address filtering: whitelist supported(50) VLAN settings: SSID and Tag VLAN bindings are supported Transmit power setting: support 1dBm linear adjustment WDS Function: Yes Limit on the number of wireless clients: Yes QoS：WMM Kick out weak signal devices and prohibit weak signal devices from accessing: Yes

System administration

Device management: full Chinese WEB management Syslog: Yes Factory Reset: Yes Backup configuration: Yes Import Configuration: Yes Software Upgrades: Yes Ping Watchdog: Yes

TL-XAP5402GP is a new generation of AX5400 high-power outdoor AP launched by TP-LINK, which provides Gigabit Ethernet port and 2.5G optical port for data transmission, and provides DC, standard PoE, and Passive PoE power supply modes, providing flexible networking. It can be widely used in outdoor scenarios such as squares, parks, stations, and stadiums to provide high-quality wireless coverage.1. Adopt 11Ax wireless technologyDual-band concurrency, 5378Mbps wireless rateSupport 2.4G/5G dual-band concurrency, 2.4GHz frequency band provides 574Mbps wireless transmission rate, 5GHz frequency band provides 4804Mbps wireless transmission rate, built-in omnidirectional high-gain dual-polarization antenna.2. Professional hardware and software designSupport wireless MESH networking, blind spot signal coverage expansionis more convenient Through TP-LINK MESH technology, the network can be expanded wirelessly by pressing a button, and some areas can be wired without wiring to achieve wireless signal expansion, which is suitable for small and medium-sized environments with low traffic density, easy to use and unified configuration.Independent power amplifier circuit to improve transmission power Theexternal independent power amplifier circuit (PA) and low noise power amplifier receiving circuit (LNA: Low Noise Amplifier) further improve the wireless transmission power, reduce the noise interference of wireless signal reception, and cover a wider range.Automatic RF Tuning Optimizes Overall PerformanceAutomatic RF tuning, automatically calculates the neighbor relationship between APs in the network, and automatically adjusts the wireless transmit power and channel based on the real-time interference and load conditions of nearby devices, ensuring that the overall wireless network is always in a high-speed, high-performance operation state.Intelligently Kick Weak Signal Devices to Improve Wireless QualityYou can set a weak signal strength threshold to intelligently identify, prohibit, and kick devices whose signal strength is lower than the threshold. Prevent weak signal devices from slowing down network efficiency and improve the roaming quality of the entire wireless network.Intelligent roaming technology improves the wireless experience of each userThe intelligent roaming technology based on the 802.11kvr protocol helps mobile phones, pads, computers and other terminal devices to automatically connect to the AP with the best signal quality in the high-density environment of multiple APs such as conference rooms, office areas, bars, and KTVs, and realizes fast roaming within 50ms. Effectively improve the user experience of each user and the overall performance of the wireless network.3. High-performance interfaceGigabit network port, higher speed Internet accessThe 1000Mbps network port is adopted, which greatly improves the speed compared with the 100 Gigabit network port, making the wired interface no longer a bottleneck for wireless transmission and meeting the high-speed Internet access needs in multi-user and high-bandwidth scenarios.2.5G SFP optical port, more convenient direct connectionOne 2.5G SFP fiber module slot is provided to install SFP fiber modules. Optical fiber is directly connected to the AP, which can effectively solve the cabling problem when the AP is far away from the equipment center.Fourth, the construction is convenient, the management is simple, the maintenanceis worry-free A variety of power supply methodsa, standard PoE power supply, more convenient constructionStandard PoE power supply, no external power supply, each AP only needs one network cable, convenient construction.Note: It needs to be used with PoE power supply equipment such as PoE switches and standard PoE power injectors.b. Passive PoE power supply, power supply transmission distance up to 100 metersSupport Passive PoE power supply, power supply transmission distance up to 100 meters, solve the problem of difficult power access in outdoor environment, and flexibly distribute points according to needs.c. Support 12V~53.5V DC power supply, no need to purchase PoE switches, and reduce networking costs.Note: This product ships DC power adapter and non-standard PoE power supply module.A variety of installation methodssupport pole and wall mounting at the same time, and the horizontal and vertical angles can be adjusted, which is simple to install and adapts to more scenarios.IP68 Dustproof and WaterproofIt provides IP68 dustproof and waterproof capabilities, and can work normally in extreme environments as low as -30°C and as high as 65°C, without fear of wind, sun, rain and snow.Unified management of TP-LINK commercial cloud platformRemote centralized management of multiple projects, efficient and convenientReal-time monitoring of equipment status, timely and accurate alarmsGraphical data analysis, clear at a glanceSupport mobile APP, management anytime, anywhereIndependent Hardware Protection Circuit, Automatic Recovery of AP Abnormal WorkBuilt-in independent hardware protection circuit, when the AP works abnormally, it can be automatically restored without manual intervention, ensuring stable Wi-Fi signal coverage and more worry-free maintenance in the later stage.

Next-generation Wi-Fi 6 (802.11ax) technology
11AX dual-band concurrency, the maximum wireless speed can reach 5378Mbps
The 2.5G SFP optical port provides faster Internet access and more convenient direct connection
Built-in 5dBi omnidirectional antenna, independent RF circuit design, covering a radius of up to 500 meters
The shell design of the professional room can reach IP68 for waterproof and dustproof, and the working temperature can reach -30°C~65°C, which can adapt to various harsh environments
Automatic RF tuning optimizes overall performance
Automatically rejects weak signal devices to avoid dragging down the entire network and improve wireless network performance
DC, 802.3bt/at PoE and Passive PoE power supply, flexible distribution
Pole/wall mounting, easy maintenance
Centralized management of TP-LINK commercial network cloud platform is supported
It can provide a simpler, more convenient, and more secure network experience for small and medium-sized businesses