AC3800 Quad-Band Wireless AP

• 11AC dual-band concurrency, four radios are connected at the same time, and the maximum wireless rate can reach 3800Mbps
• Gigabit SFP optical port, direct connection is more convenient
• Built-in 5dBi omnidirectional antenna, independent RF circuit design, covering a radius of up to 300 meters
• The shell design of the professional room can reach IP68 for waterproof and dustproof, and the working temperature can reach -30°C~65°C, which can adapt to various harsh environments
• Spectrum navigation for better load balance in the 2.4GHz and 5GHz bands
• The power is linearly adjustable, effectively reducing mutual interference between APs
• Automatically rejects weak signal devices to avoid dragging down the entire network and improve wireless network performance
• Independent hardware protection circuit, which can automatically restore abnormal APs
• Passive PoE network cable power supply, flexible distribution
• Pole/wall mounting, flexible and simple
• The radio calibration function and 802.11r protocol are not supported, but the software will be updated in the near future
• It can provide a simpler, more convenient, and more secure network experience for small and medium-sized businesses

Hardware specifications

Product model	TL-HDAP3802GP omnidirectional
Installation:	Pole/wall mounting
Size	360*360*60mm
Wireless	2.4GHz frequency band: 600+600Mbps 5GHz frequency band: 1300+1300Mbps
Port	1 x 10/100/1000Mbps RJ45 port One 100/1000Mbps SFP interface
Antenna	Built-in 5dBi omnidirectional antenna
Antenna coverage angle	360°
Light	1 system indicator
Button	1 RESET button 1 x FAT/FIT mode toggle switch
Power supply	802.3bt/at standard PoE power supply 12-53.5V DC power supply 53.5VDC/1.22A Passive PoE power supply, power supply distance up to 100M
Power consumption of the whole machine	The maximum power consumption of PoE power supply is 41.30W The standby power consumption of PoE power supply is 8.75W
Manage	FIT AP MODE: MANAGED BY TP-LINK WIRELESS CONTROLLER (AC). FAT AP mode: independent web page management
Environmental protection	IP68 rated for dust and water resistance
Use environment	Operating temperature: -30°C~65°C Operating humidity: 10%~90%RH non-condensing Storage temperature: -40°C~70°C Storage humidity: 5%~90%RH non-condensing
Recommended Coverage Distance (Open Environment)	2.4G: 180 meters 5G: 300 meters (the actual coverage distance may vary when used with different wireless terminals)

Software Specifications (FAT AP Mode)

Wireless capability	SSID Broadcast: Yes Number of SSIDs: 2.4G: 8+8, 5G: 8+8 Network type: guest network, employee network Wireless encryption: WPA, WPA2, WPA-PSK, WPA2-PSK User isolation: Isolation between wireless networks and within APs Wireless MAC address filtering: whitelist supported(50) VLAN settings: SSID and Tag VLAN bindings are supported Transmit power setting: support 1dBm linear adjustment WDS Function: Yes Limit on the number of wireless clients: Yes QoS：WMM Kick out weak signal devices and prohibit weak signal devices from accessing: Yes
System administration	Device management: full Chinese WEB management Syslog: Yes Factory Reset: Yes Backup configuration: Yes Import Configuration: Yes Software Upgrades: Yes Ping Watchdog: Yes
Wireless belt capacity is recommended	60（2.4G）+110（5G）
Maximum wireless belt capacity	128（2.4G）+128（5G）

11AC dual-band concurrency, four radios are connected at the same time, and the maximum wireless rate can reach 3800Mbps
Gigabit SFP optical port, direct connection is more convenient
Built-in 5dBi omnidirectional antenna, independent RF circuit design, covering a radius of up to 300 meters
The shell design of the professional room can reach IP68 for waterproof and dustproof, and the working temperature can reach -30°C~65°C, which can adapt to various harsh environments
Spectrum navigation for better load balance in the 2.4GHz and 5GHz bands
The power is linearly adjustable, effectively reducing mutual interference between APs
Automatically rejects weak signal devices to avoid dragging down the entire network and improve wireless network performance
Independent hardware protection circuit, which can automatically restore abnormal APs
Passive PoE network cable power supply, flexible distribution
Pole/wall mounting, flexible and simple
The radio calibration function and 802.11r protocol are not supported, but the software will be updated in the near future
It can provide a simpler, more convenient, and more secure network experience for small and medium-sized businesses