AX3000 dual-band Gigabit Wi-Fi 6 wireless panel AP

• Next-generation Wi-Fi 6 (802.11ax) technology
• 11AX dual-band concurrency, 4 spatial streams, the highest wireless speed can reach 2976Mbps, and 5G 2 spatial streams can reach 2402Mbps
• Powered by 802.3at standard PoE network cable, no external power supply is required
• Spectrum navigation guides dual-band users to connect to the 5GHz band first, so that the two frequency bands of 2.4GHz and 5GHz are load balanced to ensure network performance
• FIT mode supports automatic RF calibration
• FIT mode supports intelligent roaming
• Support the function of rejecting and disabling weak signal devices
• Fat and thin are integrated, and different modes can be selected according to different application environments
• It supports centralized management of TP-LINK commercial network cloud platform
• Support TP-LINK business cloud APP remote viewing/management

Hardware specifications

Product model	TL-XAP3008GI-PoE
Installation:	Directly installed into the GB 86 network wiring cassette
Size	166*87*49mm
Wireless rate	2.4GHz ：574Mbps 5GHz ：2402Mbps
Port	Front bottom: 4 x 10/100M/1000M RJ45 ports, 1 penetration port Rear: 1 x 10/100M/1000M RJ45 port, 1 x penetration)
Antenna	Built-in antenna
Light	1 system indicator
Button	1 x FAT/FIT mode toggle switch 1 Reset button
Power supply	Standard PoE power supply
Power consumption of the whole machine	Standby power consumption: 7.2W Maximum power consumption: 17W
Manage	FIT AP MODE: MANAGED BY TP-LINK WIRELESS CONTROLLER (AC). FAT AP mode: independent web page management
Use environment	Operating temperature: 0°C~40°C Operating humidity: 10%~90%RH non-condensing Storage temperature: -40°C~70°C Storage humidity: 5%~90%RH non-condensing

Software Specifications (FAT AP Mode)

Wireless capability	SSID Broadcast: Yes Number of SSIDs: 7 (2.4G) + 7 (5G) (support Chinese SSID) Network type: guest network, employee network Wireless encryption: WPA, WPA2, WPA3, WPA-PSK, WPA2-PSK User isolation: Isolation between wireless networks and within APs Wireless MAC address filtering: whitelist is supported VLAN settings: SSID and Tag VLAN bindings are supported Transmit power setting: support 1dBm linear adjustment WDS Function: Yes Limit on the number of wireless clients: Yes QoS：WMM Disable Weak Signal Device Access: Yes Reject weak signal devices: Yes Automatic RF tuning is supported Intelligent roaming is supported
The maximum number of clients that can be associated	127（2.4G）+127（5G）
System administration	Device management: full Chinese WEB management Syslog: Yes Factory Reset: Yes Backup configuration: Yes Import Configuration: Yes Software Upgrades: Yes Ping Watchdog: Yes

Next-generation Wi-Fi 6 (802.11ax) technology
11AX dual-band concurrency, 4 spatial streams, the highest wireless speed can reach 2976Mbps, and 5G 2 spatial streams can reach 2402Mbps
Powered by 802.3at standard PoE network cable, no external power supply is required
Spectrum navigation guides dual-band users to connect to the 5GHz band first, so that the two frequency bands of 2.4GHz and 5GHz are load balanced to ensure network performance
FIT mode supports automatic RF calibration
FIT mode supports intelligent roaming
Support the function of rejecting and disabling weak signal devices
Fat and thin are integrated, and different modes can be selected according to different application environments
It supports centralized management of TP-LINK commercial network cloud platform
Support TP-LINK business cloud APP remote viewing/management