BE13000 Tri-band Wi-Fi 7 Outdoor Wireless AP

The TL-7HDAP13000TCS-PoE/DC is a new generation of flagship Wi-Fi 7 high-power outdoor AP launched by TP-LINK, providing 10G network port and 10G optical port for data transmission, and providing DC, standard PoE, and passive PoE power supply modes, providing flexible networking. It can be widely used in outdoor scenarios such as campus playgrounds, squares, parks, stations, and stadiums, providing high-quality wireless coverage.

1. Adopt 11BE wireless technology
Tri-band concurrency, 12908Mbps wireless rate
Support 2.4G/5G1/5G2 tri-band concurrency, 2.4GHz frequency band provides 689Mbps wireless transmission rate, 5GHz-1 frequency band provides 5765Mbps wireless transmission rate, The 5GHz-2 band provides a wireless transmission rate of 2882Mbps and has a built-in omnidirectional high-gain dual-polarization antenna.

2. Professional hardware and software design
Support wireless MESH networking, blind spot signal coverage expansion
is more convenient Through TP-LINK MESH technology, the network can be expanded wirelessly by pressing a button, and some areas can be wired without wiring to achieve wireless signal expansion, which is suitable for small and medium-sized environments with low traffic density, easy to use and unified configuration.

Independent power amplifier circuit to improve transmission power The
external independent power amplifier circuit (PA) and low noise power amplifier receiving circuit (LNA: Low Noise Amplifier) further improve the wireless transmission power, reduce the noise interference of wireless signal reception, and cover a wider range.

Automatic RF Tuning Optimizes Overall Performance
Automatic RF tuning, automatically calculates the neighbor relationship between APs in the network, and automatically adjusts the wireless transmit power and channel based on the real-time interference and load conditions of nearby devices, ensuring that the overall wireless network is always in a high-speed, high-performance operation state.

Intelligently Kick Weak Signal Devices to Improve Wireless Quality
You can set a weak signal strength threshold to intelligently identify, prohibit, and kick devices whose signal strength is lower than the threshold. Prevent weak signal devices from slowing down network efficiency and improve the roaming quality of the entire wireless network.

Intelligent roaming technology improves the wireless experience of each user
The intelligent roaming technology based on the 802.11kvr protocol helps mobile phones, pads, computers and other terminal devices to automatically connect to the AP with the best signal quality in the high-density environment of multiple APs such as conference rooms, office areas, bars, and KTVs, and realizes fast roaming within 50ms. Effectively improve the user experience of each user and the overall performance of the wireless network.

3. High-performance interface
10G network port, higher speed Internet access
The 10G network port is adopted, and the speed is greatly increased compared with the gigabit network port, so that the wired interface is no longer the bottleneck of wireless transmission, and meets the high-speed Internet access needs in multi-user and high-bandwidth scenarios.

10G SFP optical port, more convenient direct connection
One 10G SFP fiber module slot is provided to install SFP fiber module. Optical fiber is directly connected to the AP, which can effectively solve the cabling problem when the AP is far away from the equipment center.

4.the construction is convenient, the management is simple, the maintenance is worry-free A variety of power supply methods,standard PoE power supply, more convenient construction
Standard PoE power supply, no external power supply, each AP only needs one network cable, convenient construction.
Note: It needs to be used with PoE power supply equipment such as PoE switches and standard PoE power injectors.

b. Passive PoE power supply, power supply transmission distance up to 100 meters
Support Passive PoE power supply, power supply transmission distance up to 100 meters, solve the problem of difficult power access in outdoor environment, and flexibly distribute points according to needs.

c. Support 12V~53.5V DC power supply, no need to purchase PoE switches, and reduce networking costs.
Note: This product ships DC power adapter and non-standard PoE power supply module.

A variety of installation methods
support pole and wall mounting at the same time, and the horizontal and vertical angles can be adjusted, which is simple to install and adapts to more scenarios.

IP68 Dustproof and Waterproof
It provides IP68 dustproof and waterproof capabilities, and can work normally in extreme environments as low as -30°C and as high as 65°C, without fear of wind, sun, rain and snow.

Unified management of TP-LINK commercial cloud platform
Remote centralized management of multiple projects, efficient and convenient
Real-time monitoring of equipment status, timely and accurate alarms
Graphical data analysis, clear at a glance
Support mobile APP, management anytime, anywhere

Independent Hardware Protection Circuit, Automatic Recovery of AP Abnormal Work
Built-in independent hardware protection circuit, when the AP works abnormally, it can be automatically restored without manual intervention, ensuring stable Wi-Fi signal coverage and more worry-free maintenance in the later stage.

• Next-generation Wi-Fi 7 technology
• BE13000 three-band concurrency, three radios are connected at the same time, and the theoretical maximum wireless rate can reach 12908Mbps, which is twice the number of ordinary dual-band APs
• 1 x 10G SFP+ port, 1 x 10G Ethernet port, providing 10G high-speed wired connection
• Professional tri-band antenna design, built-in 5dBi omnidirectional antenna, covering a radius of up to 500 meters
• External independent FEM device improves wireless signal coverage and reception quality
• The shell design of the professional room can reach IP68 for waterproof and dustproof, and the working temperature can reach -30°C~65°C, which can adapt to various harsh environments
• It supports 802.11kvr and intelligent roaming technology
• Automatic RF tuning optimizes overall performance
• Automatically rejects weak signal devices to avoid dragging down the entire network and improve wireless network performance
• Supports 4K QAM transmission technology
• DC, 802.3bt/at PoE and Passive PoE power supply, flexible distribution
• Pole/wall mounting, easy maintenance
• Centralized management of TP-LINK commercial network cloud platform is supported
• Support TP-LINK business cloud APP remote view and management

Hardware specifications

Product model	TL-7HDAP13002TPS Easy Edition
Installation:	Pole/wall mounting
Size	360×360×73mm
Wireless	2.4GHz frequency band: 1378Mbps 5GHz-1 band: 5765Mbps 5GHz-2 frequency band: 2882Mbps, 5765Mbps with country code enabled
Port	1 x 10Gbps SFP+ interface 1 x 10Gbps RJ45 interface 1 DC interface
Antenna	Built-in 5dBi omnidirectional antenna
Antenna coverage angle	360°
Light	1 system indicator 1 x SFP indicator
Button	1 RESET button 1 x FAT/FIT mode toggle switch 1 easy-to-unroll button
Power supply	53.5VDC/1.22A Passive PoE power supply, power supply distance up to 100M IEEE 802.3bt/at standard PoE power supply 36-57V DC power supply
Manage	FIT AP MODE: MANAGED BY TP-LINK WIRELESS CONTROLLER (AC). FAT AP mode: independent web page management
Environmental protection	IP68 rated for dust and water resistance
Use environment	Operating temperature: -30°C~65°C Operating humidity: 10%~90%RH non-condensing Storage temperature: -40°C~70°C Storage humidity: 5%~90%RH non-condensing
Recommended Coverage Distance (Open Environment)	2.4G: 300 meters; 5G: 500 meters (actual coverage distance may vary when working with different wireless terminals)
Power consumption of the whole machine	Standby Power Consumption: 11.3W (PoE) Maximum Power Consumption: 50.5W (PoE)

Software Specifications (FAT AP Mode)

Wireless capability	EEE 802.11a/n/ac/ax/be, IEEE 802.11b/g/n/ax/be wireless protocols Beamforming Maximum Merge Ratio (MRC) Space-Time Block Code (STBC) Cyclic Time-Delay/Cyclic Shift Diversity (CDD/CSD) LDPC low-density parity Maximum Likelihood Decoding (MLD) Wireless Speed Up Parameter (ShortGI) SSID Broadcast/Hide Number of SSIDs: 2.4G:7, 5G-1:7, 5G-2:7 Chinese SSID, including GBK and UTF-8 encoding Set up the host network and employee network Channel bandwidth settings. 2.4G: 20M/40MHz/Auto; 5G: 20M/40M/80M/160MHz/Automatic Dynamic Channel Selection (DCS) Wi-Fi multi-band in one FIT mode spectrum navigation Transmit power setting: Lv1-Lv10, 1dBm step Isolation between wireless networks and within APs Beacon time slot setting Weak signal device rejection Weak signal devices are not allowed to access IEEE 802.11k/v/r protocol intelligent roaming Automatic RF tuning WMM: Priority-based data processing and forwarding WDS function Limit on the number of wireless clients OFDMA TWT
Network characteristics	Rate and duplex mode auto-negotiation, automatic MDI/MDI-X In FIT mode, CAPWAP interrupts service persistence AC dual-link backup in FIT mode LLDP link discovery VLANs are assigned based on the SSID to which the user accesses Manage VLANs Obtain an IP address by using DHCP Smart DHCP server FAT mode, DHCPv6, IPv6 address access, radiusv6 authentication, and other functions FIT mode: CAPWAPv6, Wportalv6 authentication, DHCPv6 protection, and other functions
Cybersecurity	FIT mode Portal authentication, MAC address authentication, and 802.1x authentication WPA, WPA2, WPA3, WPA-PSK, WPA2-PSK encryption Whitelist management of devices that can be accessed The SSID is bound to the Tag VLAN FIT mode broadcast storm suppression DHCP protection in FIT mode ARP protection in FIT mode
How it's managed	FIT mode wireless controller (AC) unified management FAT mode is managed independently of web pages Centralized management of the NMS commercial cloud platform Centralized management of TP-LINK network management system
System administration	Username/password management Syslog viewing/downloading/sending servers Manually set the synchronization time of the active-low NTP server Back up the configuration Import the configuration Factory reset Restart your device Local online upgrade, local firmware upgrade, and cloud upgrade Ping watchdog function, abnormal devices are automatically recovered In the first aid mode, the abnormal device enters the first aid page to upgrade the firmware

The TL-7HDAP13000TCS-PoE/DC is a new generation of flagship Wi-Fi 7 high-power outdoor AP launched by TP-LINK, providing 10G network port and 10G optical port for data transmission, and providing DC, standard PoE, and passive PoE power supply modes, providing flexible networking. It can be widely used in outdoor scenarios such as campus playgrounds, squares, parks, stations, and stadiums, providing high-quality wireless coverage.1. Adopt 11BE wireless technologyTri-band concurrency, 12908Mbps wireless rateSupport 2.4G/5G1/5G2 tri-band concurrency, 2.4GHz frequency band provides 689Mbps wireless transmission rate, 5GHz-1 frequency band provides 5765Mbps wireless transmission rate, The 5GHz-2 band provides a wireless transmission rate of 2882Mbps and has a built-in omnidirectional high-gain dual-polarization antenna.2. Professional hardware and software designSupport wireless MESH networking, blind spot signal coverage expansionis more convenient Through TP-LINK MESH technology, the network can be expanded wirelessly by pressing a button, and some areas can be wired without wiring to achieve wireless signal expansion, which is suitable for small and medium-sized environments with low traffic density, easy to use and unified configuration.Independent power amplifier circuit to improve transmission power Theexternal independent power amplifier circuit (PA) and low noise power amplifier receiving circuit (LNA: Low Noise Amplifier) further improve the wireless transmission power, reduce the noise interference of wireless signal reception, and cover a wider range.Automatic RF Tuning Optimizes Overall PerformanceAutomatic RF tuning, automatically calculates the neighbor relationship between APs in the network, and automatically adjusts the wireless transmit power and channel based on the real-time interference and load conditions of nearby devices, ensuring that the overall wireless network is always in a high-speed, high-performance operation state.Intelligently Kick Weak Signal Devices to Improve Wireless QualityYou can set a weak signal strength threshold to intelligently identify, prohibit, and kick devices whose signal strength is lower than the threshold. Prevent weak signal devices from slowing down network efficiency and improve the roaming quality of the entire wireless network.Intelligent roaming technology improves the wireless experience of each userThe intelligent roaming technology based on the 802.11kvr protocol helps mobile phones, pads, computers and other terminal devices to automatically connect to the AP with the best signal quality in the high-density environment of multiple APs such as conference rooms, office areas, bars, and KTVs, and realizes fast roaming within 50ms. Effectively improve the user experience of each user and the overall performance of the wireless network.3. High-performance interface10G network port, higher speed Internet accessThe 10G network port is adopted, and the speed is greatly increased compared with the gigabit network port, so that the wired interface is no longer the bottleneck of wireless transmission, and meets the high-speed Internet access needs in multi-user and high-bandwidth scenarios.10G SFP optical port, more convenient direct connectionOne 10G SFP fiber module slot is provided to install SFP fiber module. Optical fiber is directly connected to the AP, which can effectively solve the cabling problem when the AP is far away from the equipment center.4.the construction is convenient, the management is simple, the maintenance is worry-free A variety of power supply methods,standard PoE power supply, more convenient constructionStandard PoE power supply, no external power supply, each AP only needs one network cable, convenient construction.Note: It needs to be used with PoE power supply equipment such as PoE switches and standard PoE power injectors.b. Passive PoE power supply, power supply transmission distance up to 100 metersSupport Passive PoE power supply, power supply transmission distance up to 100 meters, solve the problem of difficult power access in outdoor environment, and flexibly distribute points according to needs.c. Support 12V~53.5V DC power supply, no need to purchase PoE switches, and reduce networking costs.Note: This product ships DC power adapter and non-standard PoE power supply module.A variety of installation methodssupport pole and wall mounting at the same time, and the horizontal and vertical angles can be adjusted, which is simple to install and adapts to more scenarios.IP68 Dustproof and WaterproofIt provides IP68 dustproof and waterproof capabilities, and can work normally in extreme environments as low as -30°C and as high as 65°C, without fear of wind, sun, rain and snow.Unified management of TP-LINK commercial cloud platformRemote centralized management of multiple projects, efficient and convenientReal-time monitoring of equipment status, timely and accurate alarmsGraphical data analysis, clear at a glanceSupport mobile APP, management anytime, anywhereIndependent Hardware Protection Circuit, Automatic Recovery of AP Abnormal WorkBuilt-in independent hardware protection circuit, when the AP works abnormally, it can be automatically restored without manual intervention, ensuring stable Wi-Fi signal coverage and more worry-free maintenance in the later stage.

Next-generation Wi-Fi 7 technology
BE13000 three-band concurrency, three radios are connected at the same time, and the theoretical maximum wireless rate can reach 12908Mbps, which is twice the number of ordinary dual-band APs
1 x 10G SFP+ port, 1 x 10G Ethernet port, providing 10G high-speed wired connection
Professional tri-band antenna design, built-in 5dBi omnidirectional antenna, covering a radius of up to 500 meters
External independent FEM device improves wireless signal coverage and reception quality
The shell design of the professional room can reach IP68 for waterproof and dustproof, and the working temperature can reach -30°C~65°C, which can adapt to various harsh environments
It supports 802.11kvr and intelligent roaming technology
Automatic RF tuning optimizes overall performance
Automatically rejects weak signal devices to avoid dragging down the entire network and improve wireless network performance
Supports 4K QAM transmission technology
DC, 802.3bt/at PoE and Passive PoE power supply, flexible distribution
Pole/wall mounting, easy maintenance
Centralized management of TP-LINK commercial network cloud platform is supported
Support TP-LINK business cloud APP remote view and management