TL-SG2105 Industrial Grade is a TP-LINK Industrial Ethernet switch designed for industrial environments. Provides 4 Gigabit adaptive Ethernet interfaces and 1 Gigabit SFP port.
- 4 x 10/100/1000M adaptive RJ45 ports, 1 x Gigabit SFP port
- Industrial working temperature: -40°C~75°C
- Wide voltage input: 9.6V~60VDC
- Small size (137 mm *100 mm *38 mm), better adaptable to industrial environment
- Multiple installation methods: rail installation + wall mounting
- IP30 protection: reduce the impact of dust
- It supports cloud management functions to remotely view device status, alarm exceptions, and troubleshooting
- Aluminum alloy shell, high EMC protection level, not afraid of all kinds of harsh environments
- Three-way power input, redundant backup, greatly improve the reliability of product power supply
- *The industrial switch is not equipped with a power supply at the factory, if you need to use the power supply, please purchase it separately
- It is recommended to buy our industrial-grade power supply: TL-IP75-24 or TL-IP75D-24
- V3.0 and later versions support cloud management
-40°C~75°C working temperature design, no fear of extreme temperatures
TL-SG2105 industrial grade is designed in strict accordance with the working temperature of -40°C~75°C, selected industrial-grade devices, and adopts natural heat dissipation mode to ensure that the equipment works stably for a long time in this temperature range and meets all kinds of harsh environments.
Industrial-grade protection design
High-standard electromagnetic anti-interference protection design, suitable for various harsh electromagnetic environments such as electric power and industrial plants.
Aluminum alloy shell and electroless nickel gold PCB board greatly improve the anti-corrosion performance of the equipment.
The housing can be protected by IP30 to reduce the impact of dust on the normal operation of the equipment.
9.6V~60VDC wide voltage input, multiple power protection
It supports simultaneous access of three power supplies, and the power supply is redundant to ensure the uninterrupted work of the equipment.
It supports a wide voltage input of 9.6V~60VDC, and is suitable for various industrial power supplies.
Three types of power protection are provided to greatly improve the reliability of power supply to the switch.
Featured devices
The PCB board is made of electroless nickel gold plate, which has high corrosion resistance, oxidation resistance, and excellent electrical properties.
Select high-specification and long-life Japanese capacitors to greatly improve the service life of the product.
The circuit design of the highly redundant system avoids the sudden change of the external environment from affecting the normal operation of the equipment.
TP-LINK's rigorous industrial-grade production and testing process is adopted to effectively release the electrical stress of components and greatly improve the reliability of equipment.
Compact body design, metal shell, efficient heat dissipation
The size of the fuselage is only 137mm*100mm*38mm, which can be very convenient to place in a compact work cabinet, and the high thermal conductivity aluminum alloy shell has better heat dissipation effect.
DIN rail installation is easy and flexible
The TL-SG2105 industrial grade can be easily installed on DIN rail and wall, and the installation method can be flexibly selected according to needs, making the use of industrial-grade Ethernet switches simple and reliable.
Excellent device compatibility
TP-LINK has more than 100 million Ethernet switch devices running all over the world, serving all walks of life, ensuring that TP-LINK Ethernet switches can be compatible with all kinds of network equipment and production equipment.
Port interrupt alarm, real-time monitoring of port working status
The TL-SG2105 industrial grade provides port alarm function to monitor the working status of the port in real time. Once the port is disconnected, the alarm output of the terminal block will output an alarm signal, and the user will be alerted by the user's external alarm to the occurrence of port interruption.
Simple and practical network management functions
It supports the management and maintenance of the device through the web interface and PC management software.
802.1Q VLANs, MTU VLANs, and port VLANs are supported, allowing users to flexibly divide VLANs according to their needs.
It supports QoS and three priority modes based on ports, 802.1P, and DSCP to optimize bandwidth configuration.
Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability.
Port mirroring is supported, and data from a port is forwarded to the mirrored port for network monitoring.
Port monitoring is supported, and the traffic information of each port is counted to facilitate traffic monitoring and network anomaly analysis.
It supports bandwidth control, configures port data input/output transmission rates, and reasonably allocates and utilizes bandwidth.
Storm suppression is supported to limit the broadcast traffic allowed to be received by the port to prevent broadcast storms from seriously slowing down network performance.
Hardware specifications
| Protocol Standards | - IEEE 802.3,802.3i,802.3u,802.3x,802.3ab
- Compatible with Modbus TCP, Ethernet/IP, Profinet and other protocols, it can realize transparent data transmission
|
| Port morphology | - 4 Gigabit RJ45 ports
- 1 Gigabit SFP port
|
| Light | - 5 status indicators Link/ACT
- PWR1，PWR2，PWR3
|
| Power input | - DC Input Voltage 12/24/48 VDC (9.6~ 60 VDC)
- Input Current 0.68A(MAX)
- Support reverse polarity protection
|
| Switch performance | - Store-and-forward is supported
- The MAC address table depth is 2K
|
| DIP | - Broadcast storm protection is supported
- Support WEB management
- Port interrupt alarms are supported
|
| Structure | - IP30 degree of protection
- Product size: 137mm*100mm*38mm
- Rail/wall mounting
|
| Temperature | - Operating temperature -40°C — 75°C
- Storage temperature -40°C — 85°C
|
| Humidity | - Operating humidity 10%RH — 90%RH, non-condensing
- Storage humidity 5%RH — 90%RH, non-condensing
|
| Certification standards _EMS | - IEC/EN 61000-4-2,Level 4
- IEC/EN 61000-4-3,Level 4
- IEC/EN 61000-4-4,Level 4
- IEC/EN 61000-4-5,Level 3
- IEC/EN 61000-4-6,Level 3
- IEC/EN 61000-4-8,Level 5
- IEC/EN 61000-4-9,Level 5
- IEC/EN 61000-4-10,Level 5
|
| The maximum power of the whole machine | |
Software Specifications
| Port configuration | - Ports can be turned on/off
- Port flow control can be enabled/disabled
- Supports port rate/duplex
|
| Layer 2 switching | - Dynamic learning of port addresses is supported
- Port aggregation is supported
|
| Port mirroring | - Traffic statistics are supported
- Local egress/ingress monitoring is supported
- Supports cable detection and loopback detection
|
| Multicast | - IGMP V1/V2/V3 is supported
- Multicast address display is supported
- A maximum of 128 multicast entries are supported
|
| VLAN | - 802.11Q VLAN, MTU VLAN, and port VLAN are supported
|
| Quality of Service (QoS) | - Supports 4 port queues
- Port priority, 802.1P priority, and DSCP priority are supported
- Port rate limiting and storm suppression are supported
|
| System administration | - It can be managed via a web page
- Support PC software management
|
| System tools | - Support software upgrades
- Configuration backup and configuration restoration are supported
- Support system reboot and software reset
|
Other
| Packing accessories | - Hanging wall pieces
- Warranty card
- User Manual
|
| Industrial Power Supply Selection Recommendation (Non-standard) | - TL-P12200A
- TL-P24075 Industrial Grade
- TL-IP75-24
- TL-IP75D-24
- TL-IP150-24
- TL-IP150D-24
|
TL-SG2105 Industrial Grade is a TP-LINK Industrial Ethernet switch designed for industrial environments. Provides 4 Gigabit adaptive Ethernet interfaces and 1 Gigabit SFP port.
4 x 10/100/1000M adaptive RJ45 ports, 1 x Gigabit SFP port
Industrial working temperature: -40°C~75°C
Wide voltage input: 9.6V~60VDC
Small size (137 mm *100 mm *38 mm), better adaptable to industrial environment
Multiple installation methods: rail installation + wall mounting
IP30 protection: reduce the impact of dust
It supports cloud management functions to remotely view device status, alarm exceptions, and troubleshooting
Aluminum alloy shell, high EMC protection level, not afraid of all kinds of harsh environments
Three-way power input, redundant backup, greatly improve the reliability of product power supply
*The industrial switch is not equipped with a power supply at the factory, if you need to use the power supply, please purchase it separately
It is recommended to buy our industrial-grade power supply: TL-IP75-24 or TL-IP75D-24
V3.0 and later versions support cloud management
-40°C~75°C working temperature design, no fear of extreme temperatures
TL-SG2105 industrial grade is designed in strict accordance with the working temperature of -40°C~75°C, selected industrial-grade devices, and adopts natural heat dissipation mode to ensure that the equipment works stably for a long time in this temperature range and meets all kinds of harsh environments.
Industrial-grade protection design
High-standard electromagnetic anti-interference protection design, suitable for various harsh electromagnetic environments such as electric power and industrial plants.
Aluminum alloy shell and electroless nickel gold PCB board greatly improve the anti-corrosion performance of the equipment.
The housing can be protected by IP30 to reduce the impact of dust on the normal operation of the equipment.
9.6V~60VDC wide voltage input, multiple power protection
It supports simultaneous access of three power supplies, and the power supply is redundant to ensure the uninterrupted work of the equipment.
It supports a wide voltage input of 9.6V~60VDC, and is suitable for various industrial power supplies.
Three types of power protection are provided to greatly improve the reliability of power supply to the switch.
Featured devices
The PCB board is made of electroless nickel gold plate, which has high corrosion resistance, oxidation resistance, and excellent electrical properties.
Select high-specification and long-life Japanese capacitors to greatly improve the service life of the product.
The circuit design of the highly redundant system avoids the sudden change of the external environment from affecting the normal operation of the equipment.
TP-LINK's rigorous industrial-grade production and testing process is adopted to effectively release the electrical stress of components and greatly improve the reliability of equipment.
Compact body design, metal shell, efficient heat dissipation
The size of the fuselage is only 137mm*100mm*38mm, which can be very convenient to place in a compact work cabinet, and the high thermal conductivity aluminum alloy shell has better heat dissipation effect.
DIN rail installation is easy and flexible
The TL-SG2105 industrial grade can be easily installed on DIN rail and wall, and the installation method can be flexibly selected according to needs, making the use of industrial-grade Ethernet switches simple and reliable.
Excellent device compatibility
TP-LINK has more than 100 million Ethernet switch devices running all over the world, serving all walks of life, ensuring that TP-LINK Ethernet switches can be compatible with all kinds of network equipment and production equipment.
Port interrupt alarm, real-time monitoring of port working status
The TL-SG2105 industrial grade provides port alarm function to monitor the working status of the port in real time. Once the port is disconnected, the alarm output of the terminal block will output an alarm signal, and the user will be alerted by the user's external alarm to the occurrence of port interruption.
Simple and practical network management functions
It supports the management and maintenance of the device through the web interface and PC management software.
802.1Q VLANs, MTU VLANs, and port VLANs are supported, allowing users to flexibly divide VLANs according to their needs.
It supports QoS and three priority modes based on ports, 802.1P, and DSCP to optimize bandwidth configuration.
Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability.
Port mirroring is supported, and data from a port is forwarded to the mirrored port for network monitoring.
Port monitoring is supported, and the traffic information of each port is counted to facilitate traffic monitoring and network anomaly analysis.
It supports bandwidth control, configures port data input/output transmission rates, and reasonably allocates and utilizes bandwidth.
Storm suppression is supported to limit the broadcast traffic allowed to be received by the port to prevent broadcast storms from seriously slowing down network performance.
admin - September 12, 2018
roadthemes