TL-SG2210R Industrial Grade is a new managed industrial Ethernet switch designed for industrial environments by TP-LINK. 8 Gigabit Adaptive Ethernet ports and 2 Gigabit SFP ports are available.
- 8 x 10/100/1000M adaptive RJ45 ports
- 2 Gigabit SFP ports
- Industrial working temperature: -40°C~75°C
- ERPS Ring Network Protocol
- Wide voltage input: 9.6V~60VDC
- Multiple installation methods: rail installation + wall mounting
- IP30 protection: reduce the impact of dust
- It provides WEB management, broadcast storm protection, and port interruption alarm switches to adapt to various complex network environments
- Three-way power input, redundant backup, greatly improve the reliability of product power supply
- EMS has a high level of protection, and is not afraid of all kinds of harsh environments
- *The industrial switch is not equipped with a power supply at the factory, if you need to use the power supply, please purchase it separately
- It is recommended to buy our industrial-grade power supply: TL-IP75-24 or TL-IP75D-24
-40°C~75°C working temperature design, no fear of extreme temperatures
TL-SG2210R industrial grade is designed in strict accordance with the working temperature of -40°C~75°C, and the industrial-grade devices are selected and the natural heat dissipation method is adopted to ensure that the equipment works stably for a long time in this temperature range and meets all kinds of harsh environments.
The ERP ring network protocol provides fast protection at the level of 20ms
The ERPS ring protocol is a protection protocol with too many rings. It can be single-ring and multi-ring networking, and supports fast ring network (fault self-healing time < 20ms), effectively avoiding network loops, broadcast storms and other phenomena, protecting working data, and improving network reliability. The TL-SG2210R industrial grade has strong environmental adaptability and high-speed topological self-healing, and can be widely used in various security, surveillance and other scenarios, and the link switching video is free of lag.
Industrial-grade protection design
High-standard electromagnetic anti-interference protection design, suitable for various harsh electromagnetic environments such as electric power and industrial plants.
Electroless nickel gold PCB board greatly improves the corrosion resistance of the equipment.
9.6V~60VDC wide voltage input, multiple power protection
It supports simultaneous access of three power supplies, and the power supply is redundant to ensure the uninterrupted work of the equipment.
It supports a wide voltage input of 9.6V~60VDC, and is suitable for various industrial power supplies.
Three types of power protection are provided to greatly improve the reliability of power supply to the switch.
Featured devices
The PCB board is made of electroless nickel gold plate, which has high corrosion resistance, oxidation resistance, and excellent electrical properties.
Select high-specification and long-life Japanese capacitors to greatly improve the service life of the product.
The circuit design of the highly redundant system avoids the sudden change of the external environment from affecting the normal operation of the equipment.
TP-LINK's rigorous industrial-grade production and testing process is adopted to effectively release the electrical stress of components and greatly improve the reliability of equipment.
Steel shell body, sturdy and durable, efficient heat dissipation
TL-SG2210R industrial grade adopts steel shell structure, which is durable and has high strength. The steel case design naturally dissipates heat and can be protected without the need for a fan
The product is stable and quiet, noiseless and quiet, and adapts to various harsh industrial environments.
DIN rail installation is easy and flexible
The TL-SG2210R industrial grade can be easily DIN rail mounted and wall-mounted, and the installation method can be flexibly selected according to the needs, making the use of industrial-grade Ethernet switches simple and reliable.
Port interrupt alarms are supported
TL-SG2210R industrial grade supports port alarm function, real-time monitoring of port working status, and timely output of alarm signals.
Support WEB network management to meet the needs of industrial environment management
TL-SG2210R provides web management functions and supports basic network functions such as flexible 802.1q VLANs, port monitoring, and port aggregation, which can be managed and maintained through the web interface to effectively manage the network.
Excellent device compatibility
TP-LINK has more than 100 million Ethernet switch devices running all over the world, serving all walks of life, ensuring that TP-LINK Ethernet switches can be compatible with all kinds of network equipment and production equipment.
Hardware specifications
| Protocol Standards | - IEEE 802.3,802.3i,802.3u,802.3x,802.3ab,802.3z
- Compatible with Modbus TCP, Ethernet/IP, Profinet and other protocols, it can realize transparent data transmission
|
| Port morphology | - 8 Gigabit RJ45 ports
- 2 Gigabit SFP ports
|
| Light | - 10 status indicators Link/ACT
- PWR1，PWR2，PWR3
- FAULT/SYS indicator
- RPL indicator
|
| Power input | - DC Input Voltage 12/24/48 VDC (9.6~ 60 VDC)
- Input Current: 0.9A(MAX)
- Support reverse polarity protection
|
| Switch performance | - Store-and-forward is supported
- MAC address table depth 16K
|
| DIP | - Broadcast storm protection is supported
- Support WEB management
- RPL configuration is supported
- The ERP main ring function is supported
- Port interrupt alarms are supported
|
| Structure | - IP30 degree of protection
- Product size: 137mm*128mm*65.4mm
- Rail/wall mounting
|
| Temperature | - Operating temperature -40°C — 75°C
- Storage temperature -40°C — 85°C
|
| Humidity | - Operating humidity 10%RH — 90%RH, non-condensing
- Storage humidity 5%RH — 90%RH, non-condensing
|
| Certification standards _EMS | - IEC/EN 61000-4-2,Level 4
- IEC/EN 61000-4-3,Level 4
- IEC/EN 61000-4-4,Level 4
- IEC/EN 61000-4-5,Level 3
- IEC/EN 61000-4-6,Level 3
- IEC/EN 61000-4-8,Level 5
- IEC/EN 61000-4-9,Level 5
- IEC/EN 61000-4-10,Level 5
|
| The maximum power of the whole machine | |
Software Specifications
| Manage | |
| System tools | - Support software upgrades
- Configuration backup and configuration restoration are supported
- Support system reboot and software reset
|
| Port configuration | - Ports can be turned on/off
- Port flow control can be enabled/disabled
- Supports port rate/duplex
|
| Ring network | - It supports the ERPS ring network protocol, and the maximum number of ring networks is 8
- RPL configuration is supported
|
| Layer 2 switching | - Dynamic learning of port addresses is supported
- Port aggregation is supported
|
| Port mirroring | - Traffic statistics are supported
- Local egress/ingress monitoring is supported
|
| VLAN | - 802.11Q VLAN, MTU VLAN, and port VLAN are supported
|
Other
| Packing accessories | - Hanging wall pieces
- Warranty card
- User Manual
|
TL-SG2210R Industrial Grade is a new managed industrial Ethernet switch designed for industrial environments by TP-LINK. 8 Gigabit Adaptive Ethernet ports and 2 Gigabit SFP ports are available.
8 x 10/100/1000M adaptive RJ45 ports
2 Gigabit SFP ports
Industrial working temperature: -40°C~75°C
ERPS Ring Network Protocol
Wide voltage input: 9.6V~60VDC
Multiple installation methods: rail installation + wall mounting
IP30 protection: reduce the impact of dust
It provides WEB management, broadcast storm protection, and port interruption alarm switches to adapt to various complex network environments
Three-way power input, redundant backup, greatly improve the reliability of product power supply
EMS has a high level of protection, and is not afraid of all kinds of harsh environments
*The industrial switch is not equipped with a power supply at the factory, if you need to use the power supply, please purchase it separately
It is recommended to buy our industrial-grade power supply: TL-IP75-24 or TL-IP75D-24
-40°C~75°C working temperature design, no fear of extreme temperatures
TL-SG2210R industrial grade is designed in strict accordance with the working temperature of -40°C~75°C, and the industrial-grade devices are selected and the natural heat dissipation method is adopted to ensure that the equipment works stably for a long time in this temperature range and meets all kinds of harsh environments.
The ERP ring network protocol provides fast protection at the level of 20ms
The ERPS ring protocol is a protection protocol with too many rings. It can be single-ring and multi-ring networking, and supports fast ring network (fault self-healing time &amp;amp;lt; 20ms), effectively avoiding network loops, broadcast storms and other phenomena, protecting working data, and improving network reliability. The TL-SG2210R industrial grade has strong environmental adaptability and high-speed topological self-healing, and can be widely used in various security, surveillance and other scenarios, and the link switching video is free of lag.
Industrial-grade protection design
High-standard electromagnetic anti-interference protection design, suitable for various harsh electromagnetic environments such as electric power and industrial plants.
Electroless nickel gold PCB board greatly improves the corrosion resistance of the equipment.
9.6V~60VDC wide voltage input, multiple power protection
It supports simultaneous access of three power supplies, and the power supply is redundant to ensure the uninterrupted work of the equipment.
It supports a wide voltage input of 9.6V~60VDC, and is suitable for various industrial power supplies.
Three types of power protection are provided to greatly improve the reliability of power supply to the switch.
Featured devices
The PCB board is made of electroless nickel gold plate, which has high corrosion resistance, oxidation resistance, and excellent electrical properties.
Select high-specification and long-life Japanese capacitors to greatly improve the service life of the product.
The circuit design of the highly redundant system avoids the sudden change of the external environment from affecting the normal operation of the equipment.
TP-LINK&amp;amp;#039;s rigorous industrial-grade production and testing process is adopted to effectively release the electrical stress of components and greatly improve the reliability of equipment.
Steel shell body, sturdy and durable, efficient heat dissipation
TL-SG2210R industrial grade adopts steel shell structure, which is durable and has high strength. The steel case design naturally dissipates heat and can be protected without the need for a fan
The product is stable and quiet, noiseless and quiet, and adapts to various harsh industrial environments.
DIN rail installation is easy and flexible
The TL-SG2210R industrial grade can be easily DIN rail mounted and wall-mounted, and the installation method can be flexibly selected according to the needs, making the use of industrial-grade Ethernet switches simple and reliable.
Port interrupt alarms are supported
TL-SG2210R industrial grade supports port alarm function, real-time monitoring of port working status, and timely output of alarm signals.
Support WEB network management to meet the needs of industrial environment management
TL-SG2210R provides web management functions and supports basic network functions such as flexible 802.1q VLANs, port monitoring, and port aggregation, which can be managed and maintained through the web interface to effectively manage the network.
Excellent device compatibility
TP-LINK has more than 100 million Ethernet switch devices running all over the world, serving all walks of life, ensuring that TP-LINK Ethernet switches can be compatible with all kinds of network equipment and production equipment.
admin - September 12, 2018
roadthemes