TL-SG2422F Industrial Grade is a TP-LINK industrial Ethernet switch designed for industrial environments. Provides 4 Gigabit Adaptive Ethernet ports and 18 Gigabit SFP ports.
- Provides 4 Gigabit adaptive RJ45 ports and 18 Gigabit SFP ports
- Industrial working temperature: -40°C~75°C
- Wide voltage input: 100-240 VAC
- Installation: 19 inch rack mount
- IP30 protection: reduce the impact of dust
- It supports cloud management functions to remotely view device status, alarm exceptions, and troubleshooting
- Support ERPS ring network protocol and RPL configuration
- Dual pluggable power input, redundant backup, greatly improve the reliability of product power supply
- EMS has a high level of protection, and is not afraid of all kinds of harsh environments
- Two industrial power modules are supplied as standard at the factory
-40°C~75°C working temperature design, no fear of extreme temperatures
TL-SG2422F industrial-grade Ethernet switch is designed in strict accordance with the working temperature of -40°C~75°C, selects industrial-grade devices, and adopts natural heat dissipation mode to ensure that the equipment works stably for a long time in this temperature range and meets all kinds of harsh environments.
Industrial-grade protection design
High-standard electromagnetic anti-interference protection design, suitable for various harsh electromagnetic environments such as electric power and industrial plants.
Metal shell, electroless nickel gold PCB board, greatly improve the anti-corrosion performance of the equipment.
The housing can be protected by IP30 to reduce the impact of dust on the normal operation of the equipment.
100-240VAC wide voltage input, multiple power protection
It supports the simultaneous access of two pluggable power supplies, and the power supply is redundant to ensure the uninterrupted work of the equipment.
It supports a wide voltage input of 100-240VAC, which is suitable for global mains.
Three types of power protection (reverse polarity protection, short-circuit protection, and surge protection) are provided to greatly improve the reliability of power supply to the switch
Selected devices are not afraid of all kinds of harsh industrial environments
The PCB board is made of electroless nickel gold plate, which has high corrosion resistance, oxidation resistance, and excellent electrical properties.
Select high-specification and long-life Japanese capacitors to greatly improve the service life of the product.
The circuit design of the highly redundant system avoids the sudden change of the external environment from affecting the normal operation of the equipment.
TP-LINK's rigorous industrial-grade production and testing process is adopted to effectively release the electrical stress of components and greatly improve the reliability of equipment.
19-inch rack-mounted, metal shell, efficient and natural heat dissipation
It adopts steel shell structure, which is strong and durable, and has high strength. The steel shell design naturally dissipates heat, which can ensure the stable operation of the product without fan, and is noiseless and quiet, and adapts to various harsh industrial environments.
Support WEB network management and ERP ring network function to meet the needs of industrial environment management
TL-SG2422F provides industrial-grade web management functions, supports flexible 802.1q VLAN, port monitoring, port aggregation, QoS, bandwidth control and other basic network functions, and can be managed and maintained through the web interface to effectively manage the network.
It supports the ERPS ring network function, meets the redundant backup function of communication links, and meets the communication reliability requirements of industrial scenarios.
Excellent device compatibility
TP-LINK has more than 100 million Ethernet switch devices running all over the world, serving all walks of life, ensuring that TP-LINK Ethernet switches can be compatible with all kinds of network equipment and production equipment.
Hardware specifications
| Protocol Standards | - IEEE 802.3,802.3i,802.3u,802.3x,802.3ab,802.3z
- Compatible with Modbus TCP, Ethernet/IP, Profinet and other protocols, it can realize transparent data transmission
|
| Port morphology | - 4 Gigabit RJ45 ports
- 18 Gigabit SFP ports
|
| Light | - 22 status indicators Link/ACT
- PWR1，PWR2，PWR3，FAULT
|
| Power input | - Mains input, 100-240VAC
- Supports dual hot-swappable power modules
|
| Switch performance | - Store-and-forward is supported
- The MAC address table depth is 8K
|
| DIP | |
| Structure | - IP30 degree of protection
- Product size: 440*330*44mm
- 19 inch 1U rack mount
|
| Temperature | - Operating temperature -40°C — 75°C
- Storage temperature -40°C — 85°C
|
| Humidity | - Operating humidity 10%RH — 90%RH, non-condensing
- Storage humidity 5%RH — 90%RH, non-condensing
|
| Certification standards _EMS | - IEC/EN 61000-4-2,Level 4
- IEC/EN 61000-4-3,Level 4
- IEC/EN 61000-4-4,Level 4
- IEC/EN 61000-4-5,Level 4
- IEC/EN 61000-4-6,Level 3
- IEC/EN 61000-4-8,Level 5
- IEC/EN 61000-4-9,Level 5
- IEC/EN 61000-4-10,Level 5
|
Software Specifications
| Port configuration | - Ports can be turned on/off
- Port flow control can be enabled/disabled
- Supports port rate/duplex
|
| Layer 2 switching | - Dynamic learning of port addresses is supported
- Port aggregation is supported
|
| Port mirroring | - Traffic statistics are supported
- Local egress/ingress monitoring is supported
- Supports cable detection and loopback detection
|
| Ring network | - It supports the ERPS ring network function, the maximum number of rings is 5, and the convergence time < 50ms
|
Other
| Packing accessories | - Hanging wall pieces
- Warranty card
- User Manual
|
TL-SG2422F Industrial Grade is a TP-LINK industrial Ethernet switch designed for industrial environments. Provides 4 Gigabit Adaptive Ethernet ports and 18 Gigabit SFP ports.
Provides 4 Gigabit adaptive RJ45 ports and 18 Gigabit SFP ports
Industrial working temperature: -40°C~75°C
Wide voltage input: 100-240 VAC
Installation: 19 inch rack mount
IP30 protection: reduce the impact of dust
It supports cloud management functions to remotely view device status, alarm exceptions, and troubleshooting
Support ERPS ring network protocol and RPL configuration
Dual pluggable power input, redundant backup, greatly improve the reliability of product power supply
EMS has a high level of protection, and is not afraid of all kinds of harsh environments
Two industrial power modules are supplied as standard at the factory
-40°C~75°C working temperature design, no fear of extreme temperatures
TL-SG2422F industrial-grade Ethernet switch is designed in strict accordance with the working temperature of -40°C~75°C, selects industrial-grade devices, and adopts natural heat dissipation mode to ensure that the equipment works stably for a long time in this temperature range and meets all kinds of harsh environments.
Industrial-grade protection design
High-standard electromagnetic anti-interference protection design, suitable for various harsh electromagnetic environments such as electric power and industrial plants.
Metal shell, electroless nickel gold PCB board, greatly improve the anti-corrosion performance of the equipment.
The housing can be protected by IP30 to reduce the impact of dust on the normal operation of the equipment.
100-240VAC wide voltage input, multiple power protection
It supports the simultaneous access of two pluggable power supplies, and the power supply is redundant to ensure the uninterrupted work of the equipment.
It supports a wide voltage input of 100-240VAC, which is suitable for global mains.
Three types of power protection (reverse polarity protection, short-circuit protection, and surge protection) are provided to greatly improve the reliability of power supply to the switch
Selected devices are not afraid of all kinds of harsh industrial environments
The PCB board is made of electroless nickel gold plate, which has high corrosion resistance, oxidation resistance, and excellent electrical properties.
Select high-specification and long-life Japanese capacitors to greatly improve the service life of the product.
The circuit design of the highly redundant system avoids the sudden change of the external environment from affecting the normal operation of the equipment.
TP-LINK&amp;amp;#039;s rigorous industrial-grade production and testing process is adopted to effectively release the electrical stress of components and greatly improve the reliability of equipment.
19-inch rack-mounted, metal shell, efficient and natural heat dissipation
It adopts steel shell structure, which is strong and durable, and has high strength. The steel shell design naturally dissipates heat, which can ensure the stable operation of the product without fan, and is noiseless and quiet, and adapts to various harsh industrial environments.
Support WEB network management and ERP ring network function to meet the needs of industrial environment management
TL-SG2422F provides industrial-grade web management functions, supports flexible 802.1q VLAN, port monitoring, port aggregation, QoS, bandwidth control and other basic network functions, and can be managed and maintained through the web interface to effectively manage the network.
It supports the ERPS ring network function, meets the redundant backup function of communication links, and meets the communication reliability requirements of industrial scenarios.
Excellent device compatibility
TP-LINK has more than 100 million Ethernet switch devices running all over the world, serving all walks of life, ensuring that TP-LINK Ethernet switches can be compatible with all kinds of network equipment and production equipment.
admin - September 12, 2018
roadthemes