TL-NS6300-B02 is a multi-service intelligent routing switch launched by TP-LINK for next-generation network architecture, with high scalability, high reliability, high stability, and high security. Dual boards, dual power supplies, redundant backup of key components; Two 10 Gigabit uplink service boards can be inserted, which can flexibly expand port density. It can be widely used in the core and aggregation nodes of small and medium-sized enterprise networks, and can be used as a reliable and lightweight core switching equipment.
- The modular switch for the two-story architecture of the building is positioned as a lightweight core switching device, and provides two power modules with high reliability, high scalability, and high security, supporting hot-swappable and redundant backup
- Two 10 Gigabit uplink service boards (TL-NSH6226-BU, TL-NSH6226F-BU, and TL-NSH6226GF-BU*)
- No master control design, the board automatically switches the main and sub-units according to the priority, which is stable and reliable
- It supports TP-LINK commercial cloud platform management
- *Business board must be purchased separately for shipment
Gigabit access and 10 Gigabit uplink of the service board provide strong system scalability
The TL-NS6300-B02 provides two service board slots, allowing users to flexibly select 1~2 service boards according to their actual networking requirements.
Service boards are hot-swappable, and you can easily increase the density and bandwidth of access ports by adding service boards, helping you build elastically expanded networks.
The TL-NS6300-B02 supports the TL-NSH6226-BU 10 Gigabit uplink service board.
The TL-NSH6226-BU port specifications are 24GE + 2SFP+
All ports on the service board support wire-speed forwarding to meet the requirements of high-speed networking.
*Business board sold separately
Redundant design of key components, greatly improving reliability
No master unit design, any service board can be switched to the master control unit.
Two service boards are supported, and multiple service boards work together through intelligent stacking technology to implement load balancing and mutual backup.
Two power modules are provided for redundant backup to reduce the risk of equipment power outage and service interruption.
The fan module has two built-in fans to dissipate heat from the whole machine, and supports automatic speed adjustment to ensure that the chassis works within the normal temperature range.
It supports TP-LINK commercial cloud platform management, and the operation and maintenance is simple and convenient
Support login to TP-LINK commercial cloud platform through PC web and mobile APP, only need a TP-LINK ID, and easily realize remote management.
Real-time monitoring and display of the working status of each board, and the equipment running status is clear at a glance.
When network security, devices go offline, or configuration is abnormal, alarm information is automatically pushed, and faulty devices are highlighted in the topology, so that O&M personnel can quickly locate them.
Hardware specifications
| Each chassis is TL-NS6300-B02 | - Supports 2 service board slots (TL-NSH6226-BU, TL-NSH6226F-BU, and TL-NSH6226GF-BU must be purchased separately)
- Two TL-RPS200s are standard
|
| TL-NSH6226-BU for each service board | - 24 Gigabit RJ45 electrical ports
- 2 10 Gigabit SFP+ optical ports
|
| Light | - Port, Power, System Status Indicator
|
| Performance | - Store-and-forward
- A MAC address table depth of 16K is supported
|
| Enter the power supply | |
| Dimensions(L×W×H) | |
| Use environment | - Operating temperature: 0°C~40°C
- Storage temperature: -40°C~70°C
- Operating humidity: 10%~90% RH non-condensing
- Storage humidity: 5%~90% RH non-condensing
|
Software Specifications
| Routing | - OSPF and RIP dynamic routing protocols are supported
- Static routing protocols are supported
- Proxy ARP is supported
|
| Safety features | - IP-MAC-Port-VID quaternary binding
- IP source protection, DoS protection, and port security
- 802.1X authentication, guest VLAN
|
| ACL | - Support L2~L4 packet filtering
- ACL control based on time period is supported
- Policies can be delivered based on ports and VLANs
|
| VLAN | - 802.1Q VLAN, MAC VLAN, Private VLAN, and protocol VLAN are supported
- VLAN VPN is supported
- Voice VLANs are supported
- GARP/GVRP is supported
|
| MAC address table | - 16K MAC addresses are supported
- You can set the maximum number of MAC addresses that can be learned
- Address table display, static address table, dynamic address table, and filtered address table
|
| Exchange capacity | |
| Packet forwarding rate | |
| Port management | - Port aggregation, port monitoring, and port rate limiting
- Storm suppression
|
| Spanning trees | - STP (802.1d)、RSTP (802.1w)、MSTP (802.1s)
- Spanning tree security
|
| Multicast | - IGMP V1/V2/V3 is supported
- Multicast VLANs, multicast address tables, and multicast filtering
|
| QoS | - Each port supports 8 output queues
- Port-based, 802.1P, DSCP/ToS priority is supported
- It supports four priority scheduling modes: Equ, SP, WRR, and SP+WRR
- Voice VLANs are supported
|
| DHCP | - DHCP Client、DHCP Server
- DHCP Relay
- DHCP Snooping
|
| Convergence management | - Static aggregation is supported
- Dynamic aggregation is supported
|
| Safety features | - MAC-IP-VLAN ID-Port quadruple binding is supported
- 802.1X authentication and RADIUS configuration are supported
- ARP protection, IP source protection, and DoS protection are supported
- Port isolation and port security are supported
- SSL and SSH are supported
|
| System administration | - Web management based on HTTP, SSL (v2/v3/TLSv1), and CLI management based on Telnet, Console, and SSH (v1/v2) are supported
- SNMP V1/V2/V3 (TP-LINK MIBs), GB cluster management
|
| System maintenance | - LLDP is supported
- Supports configuring import and export and system time settings
- Loopback detection, cable detection, ping, and tracert detection
- Display/filter system logs, log servers
|
admin - September 12, 2018
roadthemes