TL-FC111B industrial grade is an industrial-grade 100 Gigabit single-mode single-fiber fiber transceiver, which provides a 100 Gigabit electrical port and a 100 Gigabit SC optical port, which can convert the electrical port signal to the optical port signal and carry out long-distance data transmission through optical fiber.
TL-FC111B industrial grade adopts wavelength division multiplexing technology, transmit wavelength 1310nm, receive wavelength 1550nm, receive and transmit data through a single-mode fiber at the same time, and the maximum transmission distance is 20 kilometers.
TL-FC111B adopts industrial-grade design, with a wider operating temperature range, good reliability, outstanding quality and superior performance, which is suitable for various scenarios such as residential areas, enterprises, highways, factories and mines, and buildings.
TL-FC111B industrial grade is recommended to be used with TL-FC111A industrial grade to give full play to the product performance.
- 1 x 100 Gigabit SC optical port, 1 x 100 Gigabit RJ45 network port
- Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 20 kilometers
- Operating wavelength: 1310nm (transmit), 1550nm (receive)
- Operating temperature: -40°C ~ 75°C
Hardware specifications
| Support standards | - IEEE 802.3、IEEE802.3i、IEEE 802.3u
|
| Interface | - 1 x 100Mbps SC fiber optic interface
- 1 x 10Mbps/100Mbps adaptive RJ45 port
|
| Transmission wavelength | |
| Transmission medium | - Network cable: Category 5 or above UTP and STP
- Optical fiber: 9/125um single-mode fiber
|
| Light | - Optical and electrical ports Link/Act, PWR
|
| Power supply | |
| Size | |
| Use environment | - Operating temperature: -40°C~75°C
- Operating humidity: 10%~90%RH non-condensing
- Storage temperature: -40°C~85°C
- Storage humidity: 5%~90%RH non-condensing
|
| Light parameters | - Average emitted optical power: -14~-7dBm
- Receiver sensitivity: -32dBm
|
| Per-port data transfer rate | |
| Packet forwarding rate | |
| MAC address depth | |
| Internal caching | |
TL-FC111B industrial grade is an industrial-grade 100 Gigabit single-mode single-fiber fiber transceiver, which provides a 100 Gigabit electrical port and a 100 Gigabit SC optical port, which can convert the electrical port signal to the optical port signal and carry out long-distance data transmission through optical fiber.
TL-FC111B industrial grade adopts wavelength division multiplexing technology, transmit wavelength 1310nm, receive wavelength 1550nm, receive and transmit data through a single-mode fiber at the same time, and the maximum transmission distance is 20 kilometers.
TL-FC111B adopts industrial-grade design, with a wider operating temperature range, good reliability, outstanding quality and superior performance, which is suitable for various scenarios such as residential areas, enterprises, highways, factories and mines, and buildings.
TL-FC111B industrial grade is recommended to be used with TL-FC111A industrial grade to give full play to the product performance.
1 x 100 Gigabit SC optical port, 1 x 100 Gigabit RJ45 network port
Based on wavelength division multiplexing technology, single-mode and single-fiber transmission, the maximum transmission distance is 20 kilometers
Operating wavelength: 1310nm (transmit), 1550nm (receive)
Operating temperature: -40°C ~ 75°C
admin - September 12, 2018
roadthemes